Jumper T8SG Plus V3 & FrSky XM+?

Hi!

I have a Jumper T8SG Transmitter, and just bought a Nazgul5V2, with FrSky XM+ reciever (as from what I can read, it should work with the T8SG).

I am struggeling a LOT to make it work.

Currently running with the firmware from jumper-rc.com ( t8sg_v2-v5.0.0-1c43d1b )

I have some kind og suspicion that the firmware downloaded does NOT support D16?

I have tried download the newest Nightbuild, but it just bricks my transmitter (DFU, upload firmware, reboot in USB mode, and upload files), the screen goes either black, or remote wont turn on....

Any suggestions for what im doing wrong?

(I have tried follow the video changing from FCC to EU, it does neither help anything).
As the first thing as soon I got the quad, I sat with the transmitter and played, and I came into some kind og menu where I could choose channel 1-8 and 9-16, but after flashing firmware I cannot find this under the specific protocol...

Any suggestions would be awsome! Would be so nice to get out there with the new quad!

Thanks in advance!

www.deviationtx.com/forum/3-feedback-que...2-fcc?start=20#77455

Prova qui

Tried all, FCC, EU etc etc.. No luck at all.. (also +/- 40 on the fine tune)

-But ended uå buying Crossfire module, so think its a good alternative

Have the same tx also bought a geprc phantom same xm plus, used frskyX And fcc tried everything and nothing seemed to work and then I just moved the quad away from the tx and it worked because the same happens with the frsky spi if your quad is too close to the tx the rssi drops to 0, worked for me.

Giusto, ho notato anch'io che se troppo vicino non comunica, meglio se più di 2 metri