Need setting walkera mini cp

Start
Prev
1
Next
End

teremok
Topic Author
Offline

03 Oct 2012 14:44 #1951 by teremok

Need setting walkera mini cp was created by teremok

Please people do adjust to walkera mini cp will be very grateful! Himself but tried not to get!

Please Log in or Create an account to join the conversation.

FDR
Offline

03 Oct 2012 15:01 #1953 by FDR

Replied by FDR on topic Need setting walkera mini cp

I think you can try one of the uploaded GeniusCP configs as a starting point.
They shouldn't differ too much...

Please Log in or Create an account to join the conversation.

yohann
Offline

04 Oct 2012 20:15 #1993 by yohann

Replied by yohann on topic Need setting walkera mini cp

+1 need les réglages pour le mini cp, un mode normal et un mode 3d en iddle up pour de la bonne 3d!

merci d'avance

Please Log in or Create an account to join the conversation.

Helibasher
Offline

08 Oct 2012 19:50 #2052 by Helibasher

Replied by Helibasher on topic Need setting walkera mini cp

ive tried the config from the Genius CP but the Rx ist blinking Green/Red which means that the Gyro is disabled.

Anyone has a running config for the Mini CP or cann tell me how to enable the Gyro?

Please Log in or Create an account to join the conversation.

rototophe
Offline

08 Oct 2012 19:56 - 08 Oct 2012 19:58 #2054 by rototophe

Replied by rototophe on topic Need setting walkera mini cp

Gyro sensitivity should be on channel 5.

Set a flat curve on channel 5 with value around 50, should be getting you started.

You can adjust the value to taste and even set two different values assigned to a switch on the TX to toggle gyro gain ....

Last edit: 08 Oct 2012 19:58 by rototophe.

Please Log in or Create an account to join the conversation.

FDR
Offline

08 Oct 2012 20:04 #2056 by FDR

Replied by FDR on topic Need setting walkera mini cp

Are you sure?
I think gyro is channel 7 if the number of channels is more then 6, i.e. in deviation from v1.1.0 always...

Please Log in or Create an account to join the conversation.

rototophe
Offline

08 Oct 2012 20:10 - 08 Oct 2012 20:12 #2057 by rototophe

Replied by rototophe on topic Need setting walkera mini cp

FDR wrote: Are you sure?
I think gyro is channel 7 if the number of channels is more then 6, i.e. in deviation from v1.1.0 always...

Right. My answer is valid only if you use 6 channels, like for example if you set up your model using the 6 channels heli template. I fly a solo Pro 125 using the 6 channels template, gyro on channel 5 with a dual rate switch. Should work as well for mini CP.

Gyro will "jump" to channel 7 (I believe) if you use 8 channels.

Last edit: 08 Oct 2012 20:12 by rototophe.

Please Log in or Create an account to join the conversation.

Helibasher
Offline

08 Oct 2012 21:00 #2058 by Helibasher

Replied by Helibasher on topic Need setting walkera mini cp

I only have a Devo6s, setting a flat on channel5 wont change anything. The Rx ist still blinking red/green.

Please Log in or Create an account to join the conversation.

rototophe
Offline

08 Oct 2012 21:19 #2061 by rototophe

Replied by rototophe on topic Need setting walkera mini cp

Did you try varying the value up and down for the flat curve to see if it changes anything?

Please Log in or Create an account to join the conversation.

Helibasher
Offline

08 Oct 2012 21:24 #2062 by Helibasher

Replied by Helibasher on topic Need setting walkera mini cp

Yes, i tried 50 and 100. Still having the blinking after binding.

Please Log in or Create an account to join the conversation.

rototophe
Offline

08 Oct 2012 21:27 #2063 by rototophe

Replied by rototophe on topic Need setting walkera mini cp

Wierd.
When you say it is blinking red/green, is it like 6 axis / 3 axis gyro like on the ladybird? I mean the color code?

Please Log in or Create an account to join the conversation.

Helibasher
Offline

08 Oct 2012 21:35 #2065 by Helibasher

Replied by Helibasher on topic Need setting walkera mini cp

I dont have a Ladybird, so i dont know what its blinking.

Whats the difference between 6 axis and 3 axis gyro? Its only blinks one red and one green.

Please Log in or Create an account to join the conversation.

Helibasher
Offline

08 Oct 2012 22:31 #2068 by Helibasher

Replied by Helibasher on topic Need setting walkera mini cp

Got it, the Gyro was configured on Channel7. So it does not work with my Devo6s. I changed the Gyro now to Channel5 and now it works.

Please Log in or Create an account to join the conversation.

rototophe
Offline

08 Oct 2012 23:23 #2071 by rototophe

Replied by rototophe on topic Need setting walkera mini cp

Good! Glad you got it figured out

Please Log in or Create an account to join the conversation.

digitracer
Offline

09 Oct 2012 09:08 #2090 by digitracer

Replied by digitracer on topic Need setting walkera mini cp

Helibasher wrote: Got it, the Gyro was configured on Channel7. So it does not work with my Devo6s. I changed the Gyro now to Channel5 and now it works.

Just for my understanding: how and where did you configure your gyro to channel5?
I have a Genius CP with Devo6 bundled using the config file from FDR where gyro is set to channel7. Though I am wondering whether gyro is set to channel5 or 7 by default.

Please Log in or Create an account to join the conversation.

FDR
Offline

09 Oct 2012 09:19 #2091 by FDR

Replied by FDR on topic Need setting walkera mini cp

It depends on the number of channels.
For a 6 or less (i.e. 5) channel transmitter the gyro is on chammel 5, for a 7 or more channel transmitter it is on channel 7 (as is in my Genius config, switchable by the MIX switch).

However if I remember well, PB changed the code, so deviation always sends at least 8 channel (i.e. the gyro should be always on ch7), but the previous comments made me unsure about that. I had to change my Ladybird config back then, because it had 5 channels configured (gyro was on ch5), and I had to change it to a 7 channel config to move the gyro to ch7.
I have to recheck that again...

Please Log in or Create an account to join the conversation.