×

Notice

The forum is in read only mode.
  1. Forum
  3. Model Configs, Templates, Skins
  5. Model Configs
  7. Model Requests
  9. Devo 7 Firmware upgrade

Devo 7 Firmware upgrade

More
20 Jan 2016 16:29 #41991 by andyfen
Devo 7 Firmware upgrade was created by andyfen
Hi, I'm a newbie. I have a Devo 7 with Firmware 0.5A. I seem to have little control over the tail rotor. I cannot see a deviation firmware for the Devo 7??? Is there one? If so can you provide a link please?

I would also like a 'model file' for a Super CP if available. I have installed the Dfuse Upgrade Tool and have a UP02 Tx Rx kit.

Thanks
More
21 Jan 2016 06:12 #42021 by mwm
Replied by mwm on topic Devo 7 Firmware upgrade
Deviaiton does not support the Devo 7. It supports the Devo 7E, (among others), which sometimes causes confusion about the 7.
Do not ask me questions via PM. Ask in the forums, where I'll answer if I can.

My remotely piloted vehicle ("drone") is a yacht.
More
26 Jan 2016 17:33 - 26 Jan 2016 17:34 #42248 by linux-user
Replied by linux-user on topic Devo 7 Firmware upgrade

andyfen wrote: I have a Devo 7 with Firmware 0.5A.
... I have installed the Dfuse Upgrade Tool and have a UP02 Tx Rx kit.

... Then, the Devo7 editor may be a nice tool for you.
File Attachment:
Last edit: 26 Jan 2016 17:34 by linux-user.
More
26 Jan 2016 17:43 #42249 by andyfen
Replied by andyfen on topic Devo 7 Firmware upgrade
Hi Linux-user, I already have the Devo 7 editor - thanks. Trouble is, I dont know what to change :(. The only thing I've changed is Gyro to Auto. Still undrivable.
  1. Forum
  3. Model Configs, Templates, Skins
  5. Model Configs
  7. Model Requests
  9. Devo 7 Firmware upgrade
Time to create page: 0.033 seconds
Powered by Kunena Forum
Force desktop display