airplane with nose pitch mix

id like to get my devo 10 mix throttle with elevon
i found this

www.deviationtx.com/forum/model-configs/...-hobbyking-axn#52704

have same modelbut seems not work for me, it stays only like trimmed elevon not change on giving throttle

I think you need to add a mix to the throttle ch that will add down elevator as you throttle up...I have did the same on some of my planes , it takes a bit of trial to get the proper % of mix but it does work..

Just checking first, did you activate the Gear switch as per the original post's comments? Or if you have a Devo that doesn't have a Gear switch, have you moved this part of the mixer to another switch?

RE: magic_marty's post, you'd actually want to be adding to the elevator channel, using the throttle input as a source. But in your case of elevons you need to do this twice, once per elevon channel.

Must re check but seemed that Gear switch did not made change. Back home will remove prop and check. Thanks

tested without props before maiden, works ok on bench only to make negative value because of reversed channel with mi radio.

great..

Just change the throttle input mixer to be the negative curve of what it currently is (make the Scale negative)

thats what i did, removed prop, tested its ok.
gonna maiden soon have time to go on field