Yi Zhan i6S capture
- SirDomsen
- Offline
Less
More
12 Feb 2016 22:16 - 12 Feb 2016 23:46 #43060
by SirDomsen
Replied by SirDomsen on topic Yi Zhan i6S capture
Hi,
MT99XX is currently not in the Nightlies, is it?
BTW: Can Confirm That MT99XX works with CX Model CX023
It works with the MT9916 and the H7 Protocol Option. I didn't notice any differences between these two.
Flip is on Channel 6
Greetz
Domsen
MT99XX is currently not in the Nightlies, is it?
BTW: Can Confirm That MT99XX works with CX Model CX023
It works with the MT9916 and the H7 Protocol Option. I didn't notice any differences between these two.
Flip is on Channel 6
Greetz
Domsen
Last edit: 12 Feb 2016 23:46 by SirDomsen.
Please Log in or Create an account to join the conversation.
- Deezyy2476
- Offline
Less
More
- Posts: 6
12 Sep 2018 14:04 - 12 Sep 2018 14:06 #70836
by Deezyy2476
Replied by Deezyy2476 on topic Yi Zhan i6S capture
I’m having a problem binding to the T8Sg plus, maybe I’m just missing something little, but can someone tell me whT to do I have my settings as so ... I’ve tried binding by turning on the drone , then powering on the drone, binding while on ect ect.... I read up and couldn’t find any help. What does this mean???? warning: only 1 hardcoded TX ID plz help, thanks in advance
Last edit: 12 Sep 2018 14:06 by Deezyy2476. Reason: Needed attachments
Please Log in or Create an account to join the conversation.
- Deezyy2476
- Offline
Less
More
- Posts: 6
15 Sep 2018 09:37 #70910
by Deezyy2476
Replied by Deezyy2476 on topic Yi Zhan i6S capture
Was this ever solved? I've looked everywhere for binding procedures and nothing
Please Log in or Create an account to join the conversation.
- goebish
- Offline
- I Void Warranties
Less
More
- Posts: 2631
15 Sep 2018 14:10 - 15 Sep 2018 14:12 #70917
by goebish
Replied by goebish on topic Yi Zhan i6S capture
It should bind right away, if it doesn't work it could be that:
- this is a new revision that's using a different protocol or transceiver
- this protocol is emulating a xn297L @ 250kbps with the nrf24l01, same as the EAchine E010, it often doesn't work with the 4-in-1 transceivers (that's what inside the t8sg ...) because of not accurate enough oscillator and this can't be fixed in software.
- this is a new revision that's using a different protocol or transceiver
- this protocol is emulating a xn297L @ 250kbps with the nrf24l01, same as the EAchine E010, it often doesn't work with the 4-in-1 transceivers (that's what inside the t8sg ...) because of not accurate enough oscillator and this can't be fixed in software.
Last edit: 15 Sep 2018 14:12 by goebish.
Please Log in or Create an account to join the conversation.
Time to create page: 0.039 seconds
- Home
- Forum
- Development
- Protocol Development
- Yi Zhan i6S capture