Eachine E013 'Small Pepper' .. pretty please?

Oh my this controller looks better in the advert .. it's the Boldclash Bwhoop tooling, in black , with red aluminium stubby sticks.. which come off very easily ....
LT5910
I've tried MJX E011 protocol and Bayang , etc ...to no avail
no markings on the chips in the TX , which is annoying

Please show us the chips inside the stock TX.

20_CH1P1D.1

Observation from Xvaal on RCGroups ( many thanks)

" It looks like connection is bi-directional. Normal activation sequence is:
1. plug the battery
2. turn on tx - red light blinks
3. left stick full up then full down - stable red light, it stops blinking

Without the drone powered after (3) light keeps blinking.. "

www.drone-maniac.com/test-eachine-e013-small-pepper/

"Unfortunatly also for the transmitter, there is a no-name 2-in-1 chip as MCU + RF chip. It will be almost impossible to capture SPI data for a potential protocol hacking. More the E013 don’t bind any existing other radios AFAIK …… so no possibility to fly this machine with a better radio at least in a close future..."

I have a logical analyzer so let me know if it's possible and which pins I need to solder to.

Really a shame for this little guy. The transmitter is its biggest issue and I was looking forward to use a real one.
But the range can be increased substantially by routing the antenna out of the casing, away from the pcb.

Was able to find this library implementation:
github.com/534659123/LT8910/blob/master/readme.md
Can we expect that with this lib it will be added to supported protocols?