- Posts: 37
JJRC H8DH - POTENSIC F183DH - (unknown protocol)
24 Oct 2017 19:03 #65232
by Elric
JJRC H8DH - POTENSIC F183DH - (unknown protocol) was created by Elric
Test with all known procotole: no binding
Function to maintain the altitude in addition to the JJRC H8D
TX chip :
How to wire this tx chip for capture?
Function to maintain the altitude in addition to the JJRC H8D
TX chip :
How to wire this tx chip for capture?
Please Log in or Create an account to join the conversation.
28 Oct 2017 08:30 - 29 Oct 2017 18:08 #65318
by Elric
Replied by Elric on topic JJRC H8DH - POTENSIC F183DH - (unknown protocol)
Capture 8MHz :
1drv.ms/u/s!AuNBpmXL1y0Rg8tnFJENYCjjGbc4ew
Channels of capture :
MOSI => CH1
MISO => CH2
SCK => CH3
CSN => CH4
GND => GND
OFF => ON => binding => start motor => CH1 => CH2 => CH4 => CH3 => Light => video => photo => headless/return to home => flips => off
Channels of capture :
MOSI => CH1
MISO => CH2
SCK => CH3
CSN => CH4
GND => GND
OFF => ON => binding => start motor => CH1 => CH2 => CH4 => CH3 => Light => video => photo => headless/return to home => flips => off
Please Log in or Create an account to join the conversation.
29 Oct 2017 23:10 - 29 Oct 2017 23:15 #65357
by goebish
Replied by goebish on topic JJRC H8DH - POTENSIC F183DH - (unknown protocol)
Ok, I suppose it's waiting for the flags that are not implemented yet.
When you say "start motor" in your capture, does that mean you've to press a button ?
Also, please make 1 capture per function, that's really more convenient, there are too many stuffs in your capture, I can't see what is what
When you say "start motor" in your capture, does that mean you've to press a button ?
Also, please make 1 capture per function, that's really more convenient, there are too many stuffs in your capture, I can't see what is what
Please Log in or Create an account to join the conversation.
30 Oct 2017 22:09 #65370
by Elric
Replied by Elric on topic JJRC H8DH - POTENSIC F183DH - (unknown protocol)
Start motors with a button
New Capture 8MHz (one file = off + on + binding + one function) : 1drv.ms/u/s!AuNBpmXL1y0Rg8tvry_6avxpMkh5tg
Starting engines is also possible by lowering the sleeves in the center.
New Capture 8MHz (one file = off + on + binding + one function) : 1drv.ms/u/s!AuNBpmXL1y0Rg8tvry_6avxpMkh5tg
Starting engines is also possible by lowering the sleeves in the center.
Please Log in or Create an account to join the conversation.
13 Nov 2017 14:51 - 13 Nov 2017 14:54 #65794
by goebish
Replied by goebish on topic JJRC H8DH - POTENSIC F183DH - (unknown protocol)
I updated the test build:
www.dropbox.com/sh/4idi2nlmqs02rye/AABKd...GK9JlzsJQH0q-ba?dl=0
Protocol: CX10, Format: H8DH
Ch5: leds
Ch6: flips
Ch7: snapshot
Ch8: video
Ch10: "RTH" (at least they're honest, they call it "headless fly back mode"
)
Ch12: motor start / stop
Please report.
If it works I'll need a capture with the different rates to finalize the implementation.
www.dropbox.com/sh/4idi2nlmqs02rye/AABKd...GK9JlzsJQH0q-ba?dl=0
Protocol: CX10, Format: H8DH
Ch5: leds
Ch6: flips
Ch7: snapshot
Ch8: video
Ch10: "RTH" (at least they're honest, they call it "headless fly back mode"
)Ch12: motor start / stop
Please report.
If it works I'll need a capture with the different rates to finalize the implementation.
Please Log in or Create an account to join the conversation.
Time to create page: 0.115 seconds
-
Home
-
Forum
-
Development
-
Protocol Development
- JJRC H8DH - POTENSIC F183DH - (unknown protocol)