walkera deviation as joystick

hi , i use a walkera devo 8s with deviation tx 5.0 and i am trying to connect as joystick by usb, i dont know which parameter y have to change for use my RC as joystic and connect it by usb.thanks

Select USBHID as the protocol on the model config page. Here's the description from the manual:

The USBHID protocol will convert he transmitter into a USB joystick. Connecting the transmitter to a PC via the USB cable will enable the transmitter to be detected as a joystick by the computer. This may be used to enable the transmitter to control any simulators that support joystick input. Some initial calibration may be necessary and is accomplished via the control panel applet of your operating system.

Hello,

I have a Devo7E and I updated everxthing to the latest Version.
When I connect Devo7E to PC with WIN11 it is online a USB Mass Storage but not a Joystick.

I also changed to USBHID.

What can I do?

Nicht e greetings Gerhard

Hi Gerhard,

have a look here at 7.3 USB: deviationtx.com/user-manual/user-manual-7e-10

Greetings
Dirk

OK thanks. I rhink I hat to switch off and on the Transmitter. Now it works. Tankstelle a lot