Advanced Search

It's possible since last July
Just download one of the profiles in page #1.

I know but I couldn't find anything other info on X4 functions. I installed an extra switch (SWA), did the range mod, installed A7105 and NRF24L01 modules in my Devo7e and am using the a recent nightly build but have not been able to get the X4 LEDs to toggle. Any guidance re. implementing those functions in a model?

goebish wrote: Hubsan X4 protocol now has 6 channels.
Channel 5 is for LEDs, Channel 6 to enable/disable flips.

It may be in 4.0.1 - post above is six months old.

Is it possible yet with the nightly build to control the X4's LED and FLip mode?

sorry, I'm confused with Aile and Elev as English is not my first language.

What happened is the Elev controls the rolling leftward and rightward, and Aile controls the forward and backward. And I want to correct it.

musons wrote:

droople wrote: Hi there
I'm trying to configure my Devo 7e to control Hubsan X4.

I'm using left hand mode 2
I found that the Rudd and Thro work fine,but Aile and Elev didn't work in the way I want.

Currently, the Aile controls the rolling leftward and rightward, and Elev controls the forward and backward. It's the opposite way I want.

Could anyone tell me how to swap the control between Aile and Elev?

Thanks a lot.

I see two ways:
1. open modelXX.ini file with Notepad++ but never with MS Notepad and change channel1 to channel2, also ch1 to ch2 and vice versa in every place you find them in .ini file
2. open mixer window on TX and change channel function (use Deviation manual)

Are you sure you want to exchange AIL and ELE?

Currently, the Aile controls the rolling leftward and rightward, and Elev controls the forward and backward.

That doesn't sound wrong.
I would change the direction of the AIL and ELE channels.

droople wrote: Hi there
I'm trying to configure my Devo 7e to control Hubsan X4.

I'm using left hand mode 2
I found that the Rudd and Thro work fine,but Aile and Elev didn't work in the way I want.

Currently, the Aile controls the rolling leftward and rightward, and Elev controls the forward and backward. It's the opposite way I want.

Could anyone tell me how to swap the control between Aile and Elev?

Thanks a lot.

I see two ways:
1. open modelXX.ini file with Notepad++ but never with MS Notepad and change channel1 to channel2, also ch1 to ch2 and vice versa in every place you find them in .ini file
2. open mixer window on TX and change channel function (use Deviation manual)

Hi there
I'm trying to configure my Devo 7e to control Hubsan X4.

I'm using left hand mode 2
I found that the Rudd and Thro work fine,but Aile and Elev didn't work in the way I want.

Currently, the Elev controls the rolling leftward and rightward, and Aile controls the forward and backward. It's the opposite way I want.

Could anyone tell me how to swap the control between Aile and Elev?

Thanks a lot.

Hi, I'm having real fun with my X4, I think X4 it's a funny Quad to start with.

I'm using the INI file from post #13064 www.deviationtx.com/forum/protocol-devel...-on-the-way?start=20

and I can control the LED and the FLIP functions using the trims...Could be possible to see an icon when activating the LED or FLIP functions? I've tried it but I can only assing a Toggle for doing that...

Thanks in advance.

Hi, Thanks, now it's done

Calibrating the accelerometer is totaly independant of the tx. it works the same way as on the stock tx

Hi ! I'm happy because I've received my X4 today. I've seen how to calibrate it using stock radio but I need to know if is possible tocalibrate the X4 with the Devo 7e.

Thanks in advance.

because when I change battery to the X4 i need to go in the menù or to power/unpower the radio to to that. Thank you.

No that's not possible (well, not without a firmware patch).

But why would you want that ?

Is there a way to put the bind function on a switch? How? I have one of the february nightly build of deviaiton. Thank you.

The latest nightly builds let you set the video transmitter frequency for the Hubsan X4 FPV (H107D)
It has better frequency range than the stock Hubsan FPV TX (5645-5945 MHz) and remembers last used frequency.


(Click the protocol name in Model setup screen to access protocol options)

Looks like it also works with Hubsan H102D (heli) and Hubsan Spyhawk (plane)

This model file locked my dveo 10 so hard i had to pull the battery and then power it up in usb mode to remove the config file :<



[Hard fault]
devo10-v3.0.0-c960b8e
R0 = 00000000
R1 = 200050f0
R2 = 00000000
R3 = 00000000
R12 = 00000200
LR [R14] (subroutine call return address) = 00000155
PC [R15] (program counter) = 0801ba08
PSR = 4100002e
BFAR = 14353c32
CFSR = 00008200
HFSR = 40000000
DFSR = 00000000
AFSR = 00000000
SCB_SHCSR = 00000000
Top of Stack:2000c000
Stack Detect:2000be88
Backtrace:
2000be9d : 08000001
2000bec4 : 080059eb
2000bf04 : 0800dcc9
2000bf14 : 0800df81
2000bf34 : 0800fbfb
2000bf5c : 08007773
2000bf74 : 08005e37
2000bf84 : 0800de13
2000bfbc : 0800ff61
2000bfdc : 0800e995
2000bfdd : 080800e9
2000bfe4 : 0800e9f5
2000bfec : 0800eb91
2000bff4 : 0800afa5
Done

Edit: solved it by updating the fw.

I think my unusual config was related to problems with XL7105-D03 module. With new module I got quite logical config with expo for ELE and AIL.

My fight with Hubsan H107C (camera version) 'build in' control curves for getting more linear control, was ended with unusual config. Sensitivity around neutral points adjusted with 'Deadband' curve.

Config for Devo8:
'FMODE SW' used for ELE and AIL rates (80%, 90% and 100%)
'GEAR SW' used for light control (by default LEDs disabled)
'ELE DR SW' used for flip control (by default flips disabled)

Thanks, perfect!