1. Forum
  3. General
  5. Stock Firmware Help
  7. Devo 10

Devo 10

More
04 May 2014 20:17 #22885 by Linga
Devo 10 was created by Linga
Hi,
I want to reattach the Devo 10 v0.2/0.1 firmware, but the offer is only at Walkera.com v0.7/0.2 working incorrectly with QR Walkera X350.

Thanks.

Please Log in or Create an account to join the conversation.

More
04 May 2014 20:31 #22886 by PhracturedBlue
Replied by PhracturedBlue on topic Devo 10
I have 0.4A and 0.6A, but do not know where you would find 0.2. Maybe someone here has a copy.

Please Log in or Create an account to join the conversation.

More
14 May 2014 13:17 - 14 May 2014 13:21 #23226 by royalstar05
Replied by royalstar05 on topic Devo 10
I am looking to put back the origanal devention firmware back on my devo 10 (V0.7A/0.2) from walkera I got the 2 files from walkera I have been unable to get the lib. file to load
please help I need step by step
thank you
Last edit: 14 May 2014 13:21 by royalstar05. Reason: add info

Please Log in or Create an account to join the conversation.

More
05 Jul 2014 15:39 #24401 by Sputnik
Replied by Sputnik on topic Devo 10
Same problem

need help

Please Log in or Create an account to join the conversation.

More
06 Jul 2014 13:32 #24415 by PhracturedBlue
Replied by PhracturedBlue on topic Devo 10
Make sure you have the latest dfuse software from walkera
Unzip the walkera firmware zip file. If you already have done this, delete the files you unzipped and do it again! Really. It is important.
Start the Dfuse application
turn on your Tx while holding 'Ent' to put it into programming mode.
Select the 'Firmware' tab (should already be selected)
Select ...
Select the firmware dfu (should have 'Fw' in its name I think
press 'Upgrade'
when it is finished, select the 'Library' tab
Select '...' on 'Upgrade or Verify File' (DO NOT use the 'Upload File' box!!!)
select the library dfu (shoul have 'Lib' in its name I think)
press 'Upgrade'
you are now done

Please Log in or Create an account to join the conversation.

More
06 Jul 2014 14:19 #24419 by Sputnik
Replied by Sputnik on topic Devo 10
Done all
walkera on 1.2
devo 10 on 4.0.1

after that binding is okay, but commands non except on trotl gimbl move camera up and down

any other command is not working

Please Log in or Create an account to join the conversation.

More
06 Jul 2014 16:47 - 07 Jul 2014 05:15 #24428 by Sputnik
Replied by Sputnik on topic Devo 10
:(
Last edit: 07 Jul 2014 05:15 by Sputnik.

Please Log in or Create an account to join the conversation.

More
06 Jul 2014 21:45 #24445 by FDR
Replied by FDR on topic Devo 10
I've already told you, that this config is totally wrong.
It's for CP helicopters, not for quads...
You shouldn't pollute the whole forum with your question.

Please Log in or Create an account to join the conversation.

More
08 Jul 2014 19:24 #24471 by Sputnik
Replied by Sputnik on topic Devo 10
For what is upload option on dfuse?

Please Log in or Create an account to join the conversation.

More
09 Jul 2014 03:15 #24480 by vlad_vy
Replied by vlad_vy on topic Devo 10
It's usable for save models config only.

Please Log in or Create an account to join the conversation.

More
15 Jul 2014 03:18 #24585 by Plamen
Replied by Plamen on topic Devo 10
I've seen this a couple of times ... so what happens if one accidentally DOES use the "Upload File" box?

Please Log in or Create an account to join the conversation.

  1. Forum
  3. General
  5. Stock Firmware Help
  7. Devo 10
Time to create page: 0.050 seconds
Powered by Kunena Forum
Force desktop display