Devo 7 stuck in upgrade after updating

I was upgrading my Devo7 tx ant it now is frozen in upgrade. Help!

What version you're updating to?

After flashing firmware, did you then put it in USB mode (power on while holding ENT button) and upload the protocol directory? (Devo7e requirement)

You might need to reload the entire file-system. Create a backup first especially the model directory containing you model files.

If all else fails, just power up while holding down EXT button and flash it again with a good version. 4.01

And if you can't get it to power up in upgrade mode, try unplugging the battery for a bit before you power it back on.

Hi,

Devo7 is not compatible with deviation! Try flashing the original firmware file 0.5A. You can download it from walkerafans.de

Greetz
SirDomsen