Walkera RX2613-V with v100D01 ?

Hello,

I have a problem to run WK V100D01 with the RX2613V usinng an Devo8s with Deviation 4.01
In some forums people report(but at about 2-3 years back) that they run my components well with WK2801.
My problem is, that the tail-rotor starts running at zero-Throttle and stops at about 10% throttle while the main-rotor starts movingat 8% Throttle.

has anybody an solution to keep this setup running correct?

Thanks in advance for fast response,

bmwbiker

I had the Walkera V100D01 and it worked great with my WK2801-Pro.
You have to run it in COMPTB 2401 mode with the WK2801-Pro.

On your Deviation you need to have Protocol=WK2401

I have a couple models for the Walkera V100D01 if you want to try one.

deviationtx.com/forum/model-configs/2555...nd-quad-models#17995