- Posts: 29
Devo 10 setting
- saad khan
- Topic Author
- Offline
Less
More
10 Jan 2015 15:27 #27600
by saad khan
Devo 10 setting was created by saad khan
Kindly help me to set the devo 10 setting to walkera v18g01. i am totally new to this hobby. Please help me.
Please Log in or Create an account to join the conversation.
- FDR
- Offline
10 Jan 2015 18:35 #27604
by FDR
Replied by FDR on topic Devo 10 setting
If you are really new to this hobby and want an honest advice, you should by a small copter or quad first, and leave the V18G01 for a while before you kill yourself or somebody else.
After you learned to fly you can go back to the V18G01...
After you learned to fly you can go back to the V18G01...
Please Log in or Create an account to join the conversation.
- mwm
- Offline
10 Jan 2015 19:29 #27605
by mwm
Do not ask me questions via PM. Ask in the forums, where I'll answer if I can.
My remotely piloted vehicle ("drone") is a yacht.
Replied by mwm on topic Devo 10 setting
FDR is right - that's a dangerous machine you're trying to fly. While it's possible to start on that, the people who do do it with over a year of time flying a properly configured simulator, followed by another year of flying with a buddy box.
You can buy a small, cheap copter for less than the damage a blade strike with the v18g01 will do to your wallet. You can get lots of suggestions here.
You can buy a small, cheap copter for less than the damage a blade strike with the v18g01 will do to your wallet. You can get lots of suggestions here.
Do not ask me questions via PM. Ask in the forums, where I'll answer if I can.
My remotely piloted vehicle ("drone") is a yacht.
Please Log in or Create an account to join the conversation.
- saad khan
- Topic Author
- Offline
Less
More
- Posts: 29
10 Jan 2015 23:57 #27614
by saad khan
Replied by saad khan on topic Devo 10 setting
Thank's but i am not that much new. I am little know about these stuff but now confused with devo 10 setting and the gyro configuration..
Please Log in or Create an account to join the conversation.
Time to create page: 0.034 seconds
- Home
- Forum
- News, Announcements and Feedback
- Feedback & Questions
- Devo 10 setting