T8SG Lite

vlad_vy
Offline

11 Jan 2019 16:19 #72280 by vlad_vy

Replied by vlad_vy on topic T8SG Lite

You can get info at next topic:

www.deviationtx.com/forum/7-development/...r-building-deviation

Please Log in or Create an account to join the conversation.

Qmike
Topic Author
Offline

11 Jan 2019 16:54 #72281 by Qmike

Replied by Qmike on topic T8SG Lite

Corrupted file system is history!!!!
I can format and I can transfer data again.

Unfortunately a messages on the RC appears which says "Missing Modules CYRF 6936 .."
In Hardware.ini I can enable or disable this text it will not change the messages.

Any idea? (I will check the sources if this file is missing).

Please Log in or Create an account to join the conversation.

Qmike
Topic Author
Offline

11 Jan 2019 17:51 #72283 by Qmike

Replied by Qmike on topic T8SG Lite

Did check files and this file is present in different versions among others as .o
I started build twice but result still the same

Please Log in or Create an account to join the conversation.

Qmike
Topic Author
Offline

11 Jan 2019 17:58 #72284 by Qmike

Replied by Qmike on topic T8SG Lite

photo attached

Please Log in or Create an account to join the conversation.

vlad_vy
Offline

11 Jan 2019 18:07 - 11 Jan 2019 18:08 #72285 by vlad_vy

Replied by vlad_vy on topic T8SG Lite

Change hardware.ini

...
...
[modules]
; there is no need to enable the cyrf6936 module unless
; it is wired to an alternate port. It is Enabled automatically otherwise
enable-cyrf6936 = 0
; has_pa-cyrf6936 = 1
; enable-a7105    = A13
; has_pa-a7105    = 1
enable-cc2500   = A14
has_pa-cc2500   = 1
; enable-nrf24l01 = A15
; has_pa-nrf24l01 = 1
; enable-multimod = A13

Last edit: 11 Jan 2019 18:08 by vlad_vy.

Please Log in or Create an account to join the conversation.

Qmike
Topic Author
Offline

11 Jan 2019 19:27 #72288 by Qmike

Replied by Qmike on topic T8SG Lite

Halleluja!

Many thanks for your support. You are my man.

The procedure itselfes is easy but the way is difficult.
I'm quite happy to do the compiling on a Ubuntu OS.
Even when the (source)files where a kind of "hidden" in var/snap/docker/..., the docker enviroment makes it easy to compile.
Your build "assistant" also is a fun to work with.

Will see, if I assemble the "how to" for the T8SG Lite.
By the way, does it make sense to put T8SG Lite as Build online?
So far, none exist.

Again, many thks. for your helping hand!!!

Please Log in or Create an account to join the conversation.

vlad_vy
Offline

12 Jan 2019 09:12 #72295 by vlad_vy

Replied by vlad_vy on topic T8SG Lite

I don't think there is any sense to make different build for original T8SG Lite since the only difference from T8SG V2 is "hardware.ini".

Please Log in or Create an account to join the conversation.

Qmike
Topic Author
Offline

12 Jan 2019 12:07 - 12 Jan 2019 12:11 #72296 by Qmike

Replied by Qmike on topic T8SG Lite

Yes vlad_vy, you are spot on right but I guy like me was not in the know of such similarity. So maybe a small remark in the downloads will do the job.
Concerning your small change in the targets_def.h this was the trigger for restructering/initializing the file system which then shows 4mb not 2mb as before.
Modells etc. need to be adapted but this is a peace of cake.

Anyway, you have giving me a helping hand and that counts.

Cheers
Qmike

Last edit: 12 Jan 2019 12:11 by Qmike.

Please Log in or Create an account to join the conversation.

vlad_vy
Offline

23 Jan 2019 12:43 - 23 Jan 2019 12:46 #72498 by vlad_vy

Replied by vlad_vy on topic T8SG Lite

Now "t8sg_v2" firmware has flash memory auto detect enabled (from 24 January nightly build), so I think it can be used as firmware for T8SG Light, with changed "hardware.ini".

;Only useful for transmitters with an after-market vibration motor
;enable-haptic=1
;
;switch_types: 3x4, 3x3, 3x2, 3x1, 2x8, 2x7, 2x6, 2x5, 2x4, 2x3, 2x2, 2x1, potx2, potx1
;May occur more than once if necessary.
;Add nostock if stock FMOD and HOLD switches have been removed.
  extra-switches = nostock
  extra-switches = 3x4
; extra-switches = 2x2
  extra-switches = potx2
;
;button_types: trim-all, trim-(left|right)-(up|down|both)
;May occur more than once if necessary.
;extra-buttons=
;
[modules]
; there is no need to enable the cyrf6936 module unless
; it is wired to an alternate port. It is Enabled automatically otherwise
  enable-cyrf6936 = 0
; has_pa-cyrf6936 = 1
; enable-a7105    = A13
; has_pa-a7105    = 1
  enable-cc2500   = A14
  has_pa-cc2500   = 1
; enable-nrf24l01 = A15
; has_pa-nrf24l01 = 1
; enable-multimod = A13

Last edit: 23 Jan 2019 12:46 by vlad_vy.

Please Log in or Create an account to join the conversation.

thanh81
Offline

08 Apr 2020 10:42 #76165 by thanh81

Replied by thanh81 on topic T8SG Lite

Hello!
I have updated the firmware for the faulty t8sg lite. If you have the original firmware of t8sg lite, give it to me please. thank you very much !

Please Log in or Create an account to join the conversation.

Time to create page: 0.049 seconds

Force desktop display