1. Forum
  3. General
  5. General Discussions
  7. Devo 7e - Missing modules (Deviation 5.0 silp)

Devo 7e - Missing modules (Deviation 5.0 silp)

More
14 Aug 2016 19:46 #52755 by bianchifan
Devo 7e - Missing modules (Deviation 5.0 silp) was created by bianchifan
I postet a couple of days ago in another thread , so just 2nd try..
1. MCU swapped
2. TX module swapped, at the moment an A7105 is installed as told by FAQ

Deviation 5.0 nightly @ version silpstream doesn't recon my A7105 and cries for CYRF.. instead
File Attachment:


What can I do?

Please Log in or Create an account to join the conversation.

More
15 Aug 2016 05:41 - 15 Aug 2016 05:42 #52761 by D_an_W
Replied by D_an_W on topic Devo 7e - Missing modules (Deviation 5.0 silp)
Did you edit the Hardware.ini to enable the module and remove the other?

This is mine (Also has extra switches)...
;Only useful for transmitters with an after-market vibration motor
;enable-haptic=1
;
;switch_types: 3x2, 3x1, 2x2
extra-switches=3x2
;
;button_types: trim-all, trim-(left|right)-(up|down|both)
;May occur more than once if necessary.
;extra-buttons=
;
[modules]
; there is no need to enable the cyrf6936 module unless
; it is wired to an alternate port. It is Enabled automatically otherwise
; enable-cyrf6936 = B12
has_pa-cyrf6936 = 1
enable-a7105    = A13
has_pa-a7105    = 1
; enable-cc2500   = A14
; has_pa-cc2500   = 1
; enable-nrf24l01 = A14
; has_pa-nrf24l01 = 1
; enable-multimod = A13
*** Walkera Devo 10 * 4-in-1 Module * Deviation v5 *** *** Walkera Devo 7E * A7105 Module * 2x 3 Way Switches * Power Mod * Deviation v5 ***
Last edit: 15 Aug 2016 05:42 by D_an_W.

Please Log in or Create an account to join the conversation.

More
16 Aug 2016 09:52 #52802 by HappyHarry
Replied by HappyHarry on topic Devo 7e - Missing modules (Deviation 5.0 silp)
is tge cyrf module damaged? or have you shorted the wires going to it for the a7105?

Please Log in or Create an account to join the conversation.

More
16 Aug 2016 11:02 #52807 by bianchifan
Replied by bianchifan on topic Devo 7e - Missing modules (Deviation 5.0 silp)

HappyHarry wrote: is tge cyrf module damaged?

Don't know... but there is no Cyrix module, after extraction I threw it away.. :P



For I had the idea that the "Walkera module" may be assumed I checked the sources yesterday evening but I found only one point where this seems to be with no further action ...
So I decided to check some other builds:

As pointed in the theme the fault appears with the silpstream version, esp. deviation-devo7e-256-v5.0.0-65ec105-silpstream
Same situation with "normal" HappyHarry test version deviation-devo7e-256-v5.0.0-dd199b1
The message appears quite after switch on and there is nothing one can do...

Next tested version was quite normal deviation-devo7e-v5.0.0, the device started, pointed some stuff due to missing channels and pushed a message due to missing DSM2 protocol or similar, it could be quitted by pressing "enter", afterwards I saw the DEVO screen first time.. ;)
Hmm.. only one protocol at the moment, hubsan4.
At least I found a new nitely and loaded it..oh yeah, this seems to ride the trick!
Some stuff about channel 1 trouble - only the power switch is connected - followed by a deviation pic and a "Super CP" screen




My choose was silpstream because I wsitched the MCU to a 256k version and like to install additional pots and switches.
IIRC silpstream is needed unless I don't wanna build up my own production area.
Attachments:

Please Log in or Create an account to join the conversation.

More
16 Aug 2016 11:43 #52810 by HappyHarry
Replied by HappyHarry on topic Devo 7e - Missing modules (Deviation 5.0 silp)
yes you need to use silpstream's or my builds for the full 256k abilities, it's clear why the error appears as you have removed the module, but i don't understand why you just can't press enter to bypass it with silp's or my builds but you can with the stock 7e build :/

Please Log in or Create an account to join the conversation.

More
30 Aug 2016 11:00 #53265 by bianchifan
Replied by bianchifan on topic Devo 7e - Missing modules (Deviation 5.0 silp)

HappyHarry wrote: it's clear why the error appears as you have removed the module, but i don't understand why you just can't press enter to bypass it with silp's or my builds but you can with the stock 7e build :/

Last weekend i tried a couple of different FW's.. the only FW allowing an error-bypass is the actual nitely, both tacts will run, ENT ot EXT.
No chance for the 265s, all will stuck :((

Please Log in or Create an account to join the conversation.

  1. Forum
  3. General
  5. General Discussions
  7. Devo 7e - Missing modules (Deviation 5.0 silp)
Time to create page: 0.068 seconds
Powered by Kunena Forum
Force desktop display