Devo 12S nightly

Lasercopter
Offline

02 Mar 2013 17:48 #7222 by Lasercopter

Replied by Lasercopter on topic Devo 12S nightly

when i press ENT and the turn on the TX it boots up normally, no usb mode
Hardware V1.0
Software 1.4A
Library 1.0.8

Please Log in or Create an account to join the conversation.

vlad_vy
Offline

02 Mar 2013 17:52 #7223 by vlad_vy

Replied by vlad_vy on topic Devo 12S nightly

USB mode works only with Deviation firmware.

Please Log in or Create an account to join the conversation.

Lasercopter
Offline

03 Mar 2013 05:49 - 03 Mar 2013 05:49 #7260 by Lasercopter

Replied by Lasercopter on topic Devo 12S nightly

Hello everybody here are some technical feedback now that i upgraded to Deviation.
-When I turn on the radio I get only 1 the picture of 1 helicopter, everything else is black with a blue edge.
-I cannot select anything.
-Once I press any button on the RX the picture of the heli disappears and i cant get it back.
-The touch screen does not respond.
-My upload file is from February 25th
I already tried to do the upload twice and restart it, every time with no error messages.

Im back with the normal walkera software.

Hardware ver 1.0
Software ver 1.4A
Library ver 1.0.8

Last edit: 03 Mar 2013 05:49 by Lasercopter.

Please Log in or Create an account to join the conversation.

vlad_vy
Offline

03 Mar 2013 06:02 #7261 by vlad_vy

Replied by vlad_vy on topic Devo 12S nightly

Make sure that you perform Devo 12 firmware upgrade right way:
www.deviationtx.com/forum/builds/1380-de...89f1f-devo12-support

Please Log in or Create an account to join the conversation.

RCadik
Offline

03 Mar 2013 06:45 #7263 by RCadik

Replied by RCadik on topic Devo 12S nightly

I may be wrong about this, but I think part of his problem is scaling. At least that is what I discovered. I think Hexperience provided the correct scaling.
A good test for this condition, is to touch the screen about equal distance on the other side of the screen that the heli image is on. But..... keep in mind it's all quite new to me & the 12S.
Hope this helps.

Please Log in or Create an account to join the conversation.

vlad_vy
Offline

03 Mar 2013 06:51 #7264 by vlad_vy

Replied by vlad_vy on topic Devo 12S nightly

If you cann't call Tx settings screen and calibrate touch screen and sticks, press both 'EXT' and 'ENT'.

Please Log in or Create an account to join the conversation.

Lasercopter
Offline

03 Mar 2013 07:27 #7267 by Lasercopter

Replied by Lasercopter on topic Devo 12S nightly

finally got it to have the correct library, i cant select my models, how do i bind to an MSD2 plane? I couldnt get it to bind or is that not ready yet?

Thanks this is quite entertaining

Please Log in or Create an account to join the conversation.

rbe2012
Offline
So much to do, so little time...

03 Mar 2013 10:00 #7274 by rbe2012

Replied by rbe2012 on topic Devo 12S nightly

Can you tell us something about your plane, esp. which receiver it uses?
In general, you have to choose the correct protocol on the model config page (where you can change name, icon and more), then the number of channels to use and maybe some other protocol options (depending ion the protocol) by touching the protocol button itself. After setting / clearing the fixed id you can press the button at the lower right (labelled bind, rebind or reinit in dependance to the protocol used).
You have to fulfill the needs of the receiver. Some will not bind with throttle > min or other conditions.

Please Log in or Create an account to join the conversation.

Lasercopter
Offline

03 Mar 2013 14:33 - 03 Mar 2013 14:37 #7289 by Lasercopter

Replied by Lasercopter on topic Devo 12S nightly

i have two UMX Gee Bee R2 and an Orange Rx R410

This model to be precise
www.e-fliterc.com/Products/Default.aspx?ProdID=EFLU4580

And this receiver
www.hobbyking.com/hobbyking/store/__1197...2_4Ghz_Receiver.html

Thank you for your help

Last edit: 03 Mar 2013 14:37 by Lasercopter.

Please Log in or Create an account to join the conversation.

Lasercopter
Offline

13 Mar 2013 13:35 #7682 by Lasercopter

Replied by Lasercopter on topic Devo 12S nightly

any help on how to bind this plane? sorry for the silly questions, i still dont fully understand how Ddeviation works

Please Log in or Create an account to join the conversation.

rbe2012
Offline
So much to do, so little time...

13 Mar 2013 16:02 #7691 by rbe2012

Replied by rbe2012 on topic Devo 12S nightly

Did you read the manual (look at "User Manual" in the left menu)? It should tell you how to bind.
I have some Blade helis (I think UMX is Horizon Hobby too so it uses DSM2/DSMX?) and some Orange RX610 which were bound easily as described in their manuals (bind plug for the RX610, special values for throttle and rudder for the helis - throttle down and rudder right, I believe).

Please Log in or Create an account to join the conversation.

Wene001
Offline

30 Mar 2013 10:17 #8273 by Wene001

Replied by Wene001 on topic Devo 12S nightly

Is widescreen support implemented in the 12s nightly builds??
Greetz Werner

Please Log in or Create an account to join the conversation.

Hexperience
Offline

30 Mar 2013 11:27 #8277 by Hexperience

Replied by Hexperience on topic Devo 12S nightly

No, wide screen is experimental. rbe2012 has a repository in which he pulls from the official deviation repo, and that has wide screen support, real time clock etc. It will be awhile before PB looks at all the code and then if everything looks good he'll pull those changes into the main repo.

There are 10 types of people in this world. Those that understand binary and those that don't.

Please Log in or Create an account to join the conversation.

glider
Offline

03 Apr 2013 11:16 #8447 by glider

Replied by glider on topic Devo 12S nightly

HI

When You think that Devo 12S while work with DSM2???

Thanks

Please Log in or Create an account to join the conversation.

rbe2012
Offline
So much to do, so little time...

03 Apr 2013 11:35 #8452 by rbe2012

Replied by rbe2012 on topic Devo 12S nightly

The next coming version will do that. DSM2 is already supported and the 3.0 will support Devo12S.
The nightly builds do support both already.

Please Log in or Create an account to join the conversation.

oso
Offline

28 Apr 2013 21:33 #9325 by oso

Replied by oso on topic Devo 12S nightly

Finally I can go and buy my devo 12. You guys are absolutely amazing. Beeing from sweden I say. Give the Noble price to the deviation team!!!

thanks for all the hard work! forever in debt...

Tomas
Sweden

To crash is to take one step forward...

Please Log in or Create an account to join the conversation.

omija
Offline

30 Apr 2013 07:37 #9375 by omija

Replied by omija on topic Devo 12S nightly

really can not find where i can download a binary package of wide-fullscreen build for devo12....

so i am still using the firmware coming with my tx.

Please Log in or Create an account to join the conversation.

Time to create page: 0.060 seconds

Force desktop display