- Posts: 6
6 mode switch hardware mod for multi's <?>
- wavezz2k
- Topic Author
- Offline
Less
More
24 Dec 2013 01:32 #16961
by wavezz2k
6 mode switch hardware mod for multi's <?> was created by wavezz2k
Not pressing, but this would be helpful for multirotor. haven't looked inside recently, but this seems do-able for the 8s. Any reason this may not work on the 8s, before I mangle things ?
6 position potentiometer with trims, ideal for modes toggle on multirotor -
www.ebay.com/itm/UNIVERSAL-Mode-switch-6...sd%3D161120022696%26
6 position potentiometer with trims, ideal for modes toggle on multirotor -
www.ebay.com/itm/UNIVERSAL-Mode-switch-6...sd%3D161120022696%26
Please Log in or Create an account to join the conversation.
- Pattaya01
- Offline
Less
More
- Posts: 181
24 Dec 2013 01:43 - 24 Dec 2013 01:51 #16962
by Pattaya01
Replied by Pattaya01 on topic 6 mode switch hardware mod for multi's <?>
It is very easy to get 6 flight modes with 2 switches using the mixer.
www.deviationtx.com/forum/3-feedback-que...t-mode-setting#11435
and
www.deviationtx.com/forum/3-feedback-que...t-mode-setting#12544
www.deviationtx.com/forum/3-feedback-que...t-mode-setting#11435
and
www.deviationtx.com/forum/3-feedback-que...t-mode-setting#12544
Last edit: 24 Dec 2013 01:51 by Pattaya01.
Please Log in or Create an account to join the conversation.
- rbe2012
- Offline
- So much to do, so little time...
Less
More
- Posts: 1433
24 Dec 2013 08:46 #16967
by rbe2012
Replied by rbe2012 on topic 6 mode switch hardware mod for multi's <?>
This is a multi-position-switch which gives out different resistor values (configurable with the pots). To use it, you will need a ADC input pin - as far as I remember there is no such pin easily available (only with some hard soldering directly at the MCU pin).
Please Log in or Create an account to join the conversation.
Time to create page: 0.031 seconds
- Home
- Forum
- Development
- Development
- 6 mode switch hardware mod for multi's <?>