Deviation v5.0.0 build with latest protocols

Toolbox1211
Offline

12 Mar 2019 23:43 - 12 Mar 2019 23:45 #73325 by Toolbox1211

Replied by Toolbox1211 on topic Deviation v5.0.0 build with latest protocols

Will the fixed also be in the nightlys? I Just installed the dfplayer and i would miss it lol

Last edit: 12 Mar 2019 23:45 by Toolbox1211.

Please Log in or Create an account to join the conversation.

vlad_vy
Topic Author
Offline

13 Mar 2019 04:31 #73329 by vlad_vy

Replied by vlad_vy on topic Deviation v5.0.0 build with latest protocols

It will be fixed in the nightly build, pull request placed 5 days ago.

Please Log in or Create an account to join the conversation.

clips
Offline

16 Mar 2019 11:26 - 16 Mar 2019 11:28 #73388 by clips

Replied by clips on topic Deviation v5.0.0 build with latest protocols

why T8SG V2 plus can't bind E010?...I try to update the lastest firm and LCD blank?...whats wrong with T8SG V2?...and I back to default firm LCD Normal, what the protocol E010 in T8SG V plis anyone can help me please

Last edit: 16 Mar 2019 11:28 by clips.

Please Log in or Create an account to join the conversation.

OrbitalGolem
Offline

04 Apr 2019 03:05 - 04 Apr 2019 03:07 #73678 by OrbitalGolem

Replied by OrbitalGolem on topic Deviation v5.0.0 build with latest protocols

Quick question about the OrangeRx option in DSMX. On one of my Orange receivers, an R110X, I notice that the LED flickers rapidly when the OrangeRx setting is disabled and the model is bound. There's no flicker if the setting is enabled. I don't think it flickered with Deviation 3.0. Is this expected behavior?

Also, is HighSpeed (11 ms) supported on this Orange receiver?

Also, is the OrangeRx option needed for LemonRx receivers?

Many thanks in advance.

Last edit: 04 Apr 2019 03:07 by OrbitalGolem.

Please Log in or Create an account to join the conversation.

vlad_vy
Topic Author
Offline

04 Apr 2019 05:06 - 04 Apr 2019 05:07 #73681 by vlad_vy

Replied by vlad_vy on topic Deviation v5.0.0 build with latest protocols

OrangeRX protocol option correct the error at PN codes table that exist at most third party DSM receivers. You not always will meet with this error, it depends from transmitter ID, Fixed ID and RF channel. If you see that receiver LED flickers rapidly with DSMX protocol (or you can't bind with DSM2 protocol), you definitely meet with that error and you need to use "OrangeRX" protocol option.

About HighSpeed (11 ms) and Orange receiver I don't know, but most original Spectrum >7 channels receivers support HighSpeed (11 ms).

Last edit: 04 Apr 2019 05:07 by vlad_vy.

Please Log in or Create an account to join the conversation.

52dgj
Offline

12 Apr 2019 08:04 #73832 by 52dgj

Replied by 52dgj on topic Deviation v5.0.0 build with latest protocols

Can we replace the devo12 background image by replacing devo12.bmp like emu?

DEVO12,DEVO8S,DEVO7E,DEVO10,Taranis QX7,FS-i6

Please Log in or Create an account to join the conversation.

vlad_vy
Topic Author
Offline

12 Apr 2019 08:41 #73833 by vlad_vy

Replied by vlad_vy on topic Deviation v5.0.0 build with latest protocols

Why not? You need to build custom "devo12-lib.dfu" from devo12 emulator filesystem "media" folder.

www.deviationtx.com/forum/custom-skins/2...-lib-dfu-for-themers

I'm not sure that it will work for nightly builds.

Please Log in or Create an account to join the conversation.

52dgj
Offline

12 Apr 2019 10:44 #73849 by 52dgj

Replied by 52dgj on topic Deviation v5.0.0 build with latest protocols

I can't build a dfu file. Running under the D drive also generates a double slash file path.

DEVO12,DEVO8S,DEVO7E,DEVO10,Taranis QX7,FS-i6

Please Log in or Create an account to join the conversation.

vlad_vy
Topic Author
Offline

12 Apr 2019 11:27 - 12 Apr 2019 11:28 #73852 by vlad_vy

Replied by vlad_vy on topic Deviation v5.0.0 build with latest protocols

I think that something missing at library builder. Try to place "scripts" folder inside "MkDevo12Lib.exe" folder. And place "library.zip" file (do not unzip it) inside "scripts" folder. I can't send such big *.zip file to forum.

File Attachment:

File Name: scripts.zip
File Size:1,618 KB

File Attachment:

File Name: library.zip
File Size:1,575 KB

Last edit: 12 Apr 2019 11:28 by vlad_vy.

Please Log in or Create an account to join the conversation.

52dgj
Offline

12 Apr 2019 16:03 #73856 by 52dgj

Replied by 52dgj on topic Deviation v5.0.0 build with latest protocols

Thank you very much, I have successfully built the LIB file.

DEVO12,DEVO8S,DEVO7E,DEVO10,Taranis QX7,FS-i6

Please Log in or Create an account to join the conversation.

Martin109
Offline

17 Apr 2019 16:14 #73959 by Martin109

Replied by Martin109 on topic Deviation v5 builds on Devo 12S only black screen

Hi,

I installed the DFplayer mini in my DEVO12S. In order to put this into operation then I wanted to install one of the current Nightly builds.
Can also install easily.
But no matter which nightly build I try it, it's always the same problem that always only turns black screen when you turn it on.
After that, the transmitter can not be switched off.
What am I doing wrong?
If I install the 5.0 final firmware everything goes again. But that's not with the DFplayer.

Regards Martin

Please Log in or Create an account to join the conversation.

vlad_vy
Topic Author
Offline

18 Apr 2019 03:48 #73980 by vlad_vy

Replied by vlad_vy on topic Deviation v5 builds on Devo 12S only black screen

Nightly build have massive changes now and that introduced some bugs. You need wait some time until these bugs will be fixed.

Please Log in or Create an account to join the conversation.

OrbitalGolem
Offline

18 Apr 2019 13:18 - 26 Apr 2019 03:22 #73992 by OrbitalGolem

Replied by OrbitalGolem on topic Deviation v5.0.0 build with latest protocols

Thanks again Vlad for all of your efforts to keep this particular branch of Deviation stable, in light of the instability of the nightly build. For folks like me who prefer the older GUI with the latest protocol changes, your builds have been extremely useful. My update from 3.0 to your latest build above didn't have a single issue and all of my models have stayed in the air.

Last edit: 26 Apr 2019 03:22 by vlad_vy.

Please Log in or Create an account to join the conversation.

vlad_vy
Topic Author
Offline

14 May 2019 05:49 - 23 Aug 2019 04:39 #74306 by vlad_vy

Replied by vlad_vy on topic Deviation v5.0.0 build with latest protocols

"Deviation v5.0.0 build with latest protocols" (based on v5.0.0 release core)

* [Bugs3Mini] Fix flips, from goebish

Fix flip channel

* Protocol for TDR Phoenix Mini, from goebish

* Attempt adding arm channel for TDR Phoenix micro quad
* Fix bitrate
* Add arm flag
* Set high rate
* Set high rate (was medium)

* E016H protocol, add calibration flag, from goebish

Add calibration flag for E016H format.
Works same as stock controller, set both sticks to external bottom corners to start accelerometer calibration.

* Protocol bugs3mini dynamically driven trims, from goebish

Add some rocket fuel to the Bugs3Mini
https://www.deviationtx.com/forum/protocol-development/7850-bugs-3-mini?start=200#73889

* Add Bugs 3H format option, from goebish

Add Bugs 3H format option to Bugs3Mini protocol
Channel 10: Altitude hold

* Add DHD D4 and H8S 3D formats, from goebish

Add DHD D4 and H8S 3D format options to Bayang protocol

(14.05.2019)

Files deleted, see below...

Last edit: 23 Aug 2019 04:39 by vlad_vy.

Please Log in or Create an account to join the conversation.

vlad_vy
Topic Author
Offline

14 May 2019 05:51 - 23 Aug 2019 04:40 #74307 by vlad_vy

Replied by vlad_vy on topic Deviation v5.0.0 build with latest protocols

I can't attach more than 10 files, and so XMS builds attached with separate message

(14.05.2019)

Files deleted, see below...

Last edit: 23 Aug 2019 04:40 by vlad_vy.

Please Log in or Create an account to join the conversation.

vlad_vy
Topic Author
Offline

14 May 2019 05:53 - 23 Aug 2019 04:40 #74308 by vlad_vy

Replied by vlad_vy on topic Deviation v5.0.0 build with latest protocols

Fresh emulator builds

(14.05.2019)

Files deleted, see below...

Last edit: 23 Aug 2019 04:40 by vlad_vy.

Please Log in or Create an account to join the conversation.

SirDomsen
Offline

23 May 2019 11:12 #74381 by SirDomsen

Replied by SirDomsen on topic Deviation v5.0.0 build with latest protocols

Hi,

Thanks Vlad_vy for posting your custom version. I can't seem to get the nightlies to work on my 12e, see also here .

Your version works like a charm! One minor question: Once telemetry low voltage alert is triggered (on Bayang telemetry protocol), the screen changes to telemetry display. That's a bit annoying because I for sure have low voltage alerts on full throttle. Could this be avoided? Am I doing something wrong or is there a setting I have overlooked?

Cheers
Domsen

Please Log in or Create an account to join the conversation.

vlad_vy
Topic Author
Offline

23 May 2019 13:09 #74382 by vlad_vy

Replied by vlad_vy on topic Deviation v5.0.0 build with latest protocols

I don't know why it happened, it may be by design. I always have telemetry voltage box on Main screen and low voltage alert never change screen to telemetry screen.

Please Log in or Create an account to join the conversation.

old4570
Offline

31 Jul 2019 13:39 #74814 by old4570

Replied by old4570 on topic Deviation v5.0.0 build with latest protocols

??????

So what file does what ? ( How do you tell them apart ? )

Please Log in or Create an account to join the conversation.

Gerry
Offline
Bbrad

31 Jul 2019 23:44 #74817 by Gerry

Replied by Gerry on topic Deviation v5.0.0 build with latest protocols

hover your mouse over the file names to see full file names.

Devo 7e A7105 NRF24L01 CC2500 2x3 way & voice, Devo 12e 4 in 1 & voice.
FFS (Forever Fixing Stuff)

Please Log in or Create an account to join the conversation.

Time to create page: 0.220 seconds

Force desktop display

Deviation v5.0.0 build with latest protocols

Attachments:

Attachments:

File Attachment:

File Attachment:

Attachments: