Model.ini for Tarantula X6 (V2x2), V686G (FlySky)?

My life will be complete if someone can point me in the right direction to get my quads working with my shiny new Devo 7e with A7105 and nrf24l01 modules installed. I already was able to find an ini for my Hubsan X4 H107's.

Thanks in advance!

I am also looking for an ini for the X6 all I can tell you is that it uses the V202 protocol. If you end up getting anything to work, let me know!

Somehow I did not see the ini file posted on SeByDocKy's RCGroups. The download link is here: www.rcgroups.com/forums/showatt.php?atta...7754012&d=1428600261 I had to remove the "Fixed ID" section on the ini to get it to bind.
However, once bound, my LEDs turn off and I have no idea why. Anyone know a solution?

Thanks

mbk17 wrote: Somehow I did not see the ini file posted on SeByDocKy's RCGroups. The download link is here: www.rcgroups.com/forums/showatt.php?atta...7754012&d=1428600261 I had to remove the "Fixed ID" section on the ini to get it to bind.
However, once bound, my LEDs turn off and I have no idea why. Anyone know a solution?

Thanks

Maybe it was default pressed value. Press right once the yaw trimming button

That worked perfectly thanks a lot Seb, a pleasure to have a response straight from you. What is the significance of the fixed ID by the way? And where do you find it for each model?

I'm having a small problem with this ini. It seems that when trying to fly, only my CCW motors spin - my CW motors don't spin until I hit ~70% throttle, and when it does lift off, it just yaws left.

I haven't made any changes to the ini, and the quad flies fine with the stock TX. Anybody help?

Thanks!

How did you get the husban working with your devo 7e? Just picked one up today for a steal. Thanks!

im not flying any hubsans with my devo yet. Im looking for help troubleshooting my jjrc Tarantula x6

Hi everyone
I have a Devo 10 and I'm looking for the Model.ini for WLtoys V686G last version receiver.
Did someone work on it ?
Thanks

Just got done with a test flight using my Tarantula X6, Devo 7E (modded), and SeByDocKy's ini file for the V2x2 protocol. Wow! What a difference from the stock tx. Even more fun to fly!

Many thanks to you, SeByDocKy. The file works very well!

I'm using this ini on a devo 7e, of course I only have the first two flight modes.

When I bind to the stock transmitter, the lights on the quad light solid, when I bind with the 7e and this ini, they flash on and off slowly...it appears to fly correctly...is this normal or is something not completely binding correctly?