Request for Devo8 Models for any 450 helicopter

Hi everyone,

Just for testing purposes and to be sure the models I make by myself are well configured, I ask for a 450 model.ini file.
I really need it because I find some issues while flying and I think there is something wrong on my configs. Just if it were important, my 450 is a Tarot Pro and I fly with a Vbar FBL.

Please, I just want to load the model on my Devo and check its parameters with my own. It will be really helpful.

Thank you for your help.
Regards.

Ok, which RX?

My RX is a Spektrum Satellite. I bind with a DSM2 receiver.

Try the attached .ini as an example.

1. THR 1:1 for spinning up, FMODE 1 & 2 = Fixed for Governor Mode
2. AIL & ELEV: Less DR and more EXPO swiched by AIL and ELV DR Switches
3 RUD = Simple 1:1
4. Ch6 as Pitch: Flat curve fpr spinning up, FMODE 1 & 2 = Full pos and neg Pitch

If you dont use Governor at Throttle, the attached .ini has differnt V-Curves at FMODE 1 & 2

Thank you -=Hubi-Dirk=-, I will test it and will post the results. I do not fly with governor but I were thinking to enable it soon, so very useful as well.

-=Hubi-Dirk=- wrote: If you dont use Governor at Throttle, the attached .ini has differnt V-Curves at FMODE 1 & 2

Hi!, I loaded at last.
I have seen your config and see that your GEAR channel (5) you have NONE. How do you set the tail gain?
I use the switch GEAR to switch between head lock (around 40, variable) to avoid fishtail, and -100 to unset the heading lock.