- Posts: 4
- Forum
- Model Configs, Templates, Skins
- Model Configs
- Model Requests
- Config UMX Ultrix BNF Basic (EFLU6450)
Config UMX Ultrix BNF Basic (EFLU6450)
- ericart63
-
Topic Author
- Offline
Less
More
30 May 2020 06:03 #76379
by ericart63
Config UMX Ultrix BNF Basic (EFLU6450) was created by ericart63
Hello,
Could someone help me with the configuration of a UMX Ultrix BNF Basic aircraft (EFLU6450) with my Devo 8s radio with Deviation software
thank you in advance
Eric
Bonjour,
Quelqu'un pourrait il m'aider pour la configuration d'un avion UMX Ultrix BNF Basic (EFLU6450) avec ma radio Devo 8s avec le software Deviation
Merci d'avance
Eric
Could someone help me with the configuration of a UMX Ultrix BNF Basic aircraft (EFLU6450) with my Devo 8s radio with Deviation software
thank you in advance
Eric
Bonjour,
Quelqu'un pourrait il m'aider pour la configuration d'un avion UMX Ultrix BNF Basic (EFLU6450) avec ma radio Devo 8s avec le software Deviation
Merci d'avance
Eric
- -=Hubi-Dirk=-
-
- Offline
Less
More
- Posts: 221
30 May 2020 08:46 - 30 May 2020 09:46 #76380
by -=Hubi-Dirk=-
Replied by -=Hubi-Dirk=- on topic Config UMX Ultrix BNF Basic (EFLU6450)
Hi,
Motormixing seems to made by the Rudder input. If not take a look the attached config as an example for controlling throttle and direction with two motors:
- Ch 2 = left Motor, Ch 3 = right Motor, they speed up in synchron mode (TX = Mode 2).
- Rudder right = Ch 1 => speed up left Motor
- Rudder left = Ch 4 => speed up right Motor
For the Elevator and Aileron you have to setup also complex mixer.
Greetings
Dirk
Motormixing seems to made by the Rudder input. If not take a look the attached config as an example for controlling throttle and direction with two motors:
- Ch 2 = left Motor, Ch 3 = right Motor, they speed up in synchron mode (TX = Mode 2).
- Rudder right = Ch 1 => speed up left Motor
- Rudder left = Ch 4 => speed up right Motor
For the Elevator and Aileron you have to setup also complex mixer.
Greetings
Dirk
Last edit: 30 May 2020 09:46 by -=Hubi-Dirk=-.
- ericart63
-
Topic Author
- Offline
Less
More
- Posts: 4
30 May 2020 11:33 #76381
by ericart63
Replied by ericart63 on topic Config UMX Ultrix BNF Basic (EFLU6450)
Thank you
- Forum
- Model Configs, Templates, Skins
- Model Configs
- Model Requests
- Config UMX Ultrix BNF Basic (EFLU6450)
Time to create page: 0.063 seconds
-
Home
-
Forum
-
Model Configs, Templates, Skins
-
Model Configs
-
Model Requests
- Config UMX Ultrix BNF Basic (EFLU6450)