[WLToys Q2x2] CX10 protocol with option Q222

More
18 Feb 2016 20:04 - 18 Feb 2016 20:48 #43254 by teo1969
I bought a Wltoys Q222 that is working with XN297 tranceiver. I'd like to use Q222 with my transmitter devo 7e (RF24L01 modded).

by configuring the protocol CX10 with option Q242, I can bind my Q222 but the connection (binding) is "unstable", I can turn on the engines but only for few second. By switching ch5 i can switch on/off the light of Q222.

Please, I would like to know if is planned in future (nightly release) the develop of Q222 option in CX10 Protocol.

many thankes.
Teo
Last edit: 18 Feb 2016 20:48 by teo1969.

Please Log in or Create an account to join the conversation.

More
19 Feb 2016 02:04 #43275 by mwm
I don't see any hint of it being worked on, possibly because you're the first person to ask. You can help make it happen if you're wiling to capture logic signals from the transmitter. Otherwise, it'll have to wait until someone can do that.

Do not ask me questions via PM. Ask in the forums, where I'll answer if I can.

My remotely piloted vehicle ("drone") is a yacht.

Please Log in or Create an account to join the conversation.

More
19 Feb 2016 11:49 #43302 by teo1969
Replied by teo1969 on topic [WLToys Q2x2] CX10 protocol with option Q222
with which tool or sw I can sniff the remote control logic protocol? can you suggest me a site where I can figure out how I can capture the protocol. I would like to contrbute!

Please Log in or Create an account to join the conversation.

More
19 Feb 2016 13:31 #43308 by TheSFReader
Replied by TheSFReader on topic [WLToys Q2x2] CX10 protocol with option Q222
The SPI capture guide --> deviationtx.com/forum/protocol-developme...95-spi-capture-guide gives your answers ;-)

Please Log in or Create an account to join the conversation.

More
19 Feb 2016 19:15 #43327 by teo1969
Replied by teo1969 on topic [WLToys Q2x2] CX10 protocol with option Q222
many thanks for the reply.
I've detected the miso,mosi,clk and ce, pin on XN297 chip soldered on q222 trasmitter, but unfortunately i don't have SPI analizer. :(

I hope that someone might in the enterprise ....

Teo

Please Log in or Create an account to join the conversation.

Time to create page: 0.041 seconds
Powered by Kunena Forum