protocol for WL Heli V911-s

I found this topic, I want let my DEVO8S connected with my V911s.
I tried deviation-devo8-v5.0.0-0c4b4c0, deviation-devo8-v5.0.0-7fb7de1, deviation-devo8-v5.0.0-ee7176e

All these FW failed, I want use DEVO8S to control my V911s.
Please help me.

www.deviationtx.com/forum/builds/6407-de...-protocols?start=480

Try this one works for me on the 8s but don't have the 11s but worth a try.

Frustrating, I still can't succeed.

I tried it on deviation-devo8-v5.0.0-2019-10-29,

my hardware.ini is

;Only useful for transmitters with an after-market vibration motor
;enable-haptic=1
;
;switch_types: 3x2, 3x1, 2x2
;extra-switches=
;
;button_types: trim-all, trim-(left|right)-(up|down|both)
;May occur more than once if necessary.
;extra-buttons=
;
[modules]
; there is no need to enable the cyrf6936 module unless
; it is wired to an alternate port. It is Enabled automatically otherwise
enable-cyrf6936 = B12
has_pa-cyrf6936 = 1
enable-a7105 = A13
has_pa-a7105 = 1
enable-cc2500 = A14
has_pa-cc2500 = 1
enable-nrf24l01 = A15
has_pa-nrf24l01 = 1
; enable-multimod = A13

is any information I need provide?

[modules]
; there is no need to enable the cyrf6936 module unless
; it is wired to an alternate port. It is Enabled automatically otherwise
:enable-cyrf6936 = B12
;has_pa-cyrf6936 = 1
enable-a7105 = A13
has_pa-a7105 = 1
enable-cc2500 = A14
has_pa-cc2500 = 1
enable-nrf24l01 = B3
has_pa-nrf24l01 = 1
; enable-multimod = A13

That is it I think. I do not use the cc2500 on my 8s have very little that needs it. I use the nrf24l01 on A14 spot it important to me. If this is wrong you will have an error on startup screen.

I checked in my devo8s, and connect cable as 2401 to a15, 2500 to A14(TCK), 7105 to A13(tms). My question is "2401 connect to A15" is workable?

www.deviationtx.com/forum/3-feedback-que...e-install-on-devo-8s

Read this, I have never heard of A15 and I have flashed about 20 devo's but that does not mean there isn't one.

Thanks, I solved this issue.
My 4in1 module is old version.
thanks for your help.

I would like to bind my T8SG with WLToys V911s, which protocol to use?

please assist.

I use this

docs.google.com/spreadsheets/d/1nBHzT3VW...kHn1RIM84/edit#gid=0

hope it works for you

Thanks, it worked

Is there a chance to implement the V911S "sub protocol" for the Eachine E119 helicopter? It has been implemented into the DIY-Multiprotocol-TX-Module with the following commits:

https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/commit/693f9f58eb7da3254fc86e93b112b51890ec9bc2#diff-7a07c3af3b6626e17d5147f73e2e14a5
https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/commit/68a6af0eb5159e113ac324b26fa86d3e02380555#diff-7a07c3af3b6626e17d5147f73e2e14a5

If you need someone to test please let me know. Of course you can use a Futaba S-FHSS satellite receiver. But that adds some weight. It would be better to use the integrade receiver.

Hi, I am unsuccessful in binding my WL Heli V911S. I am using Jumper T8SG Plus with deviation-t8sg_v2-v5.0.0-48d7be1. I have tried the V911S protocol with a few fixed IDs (123456, 888888, 999999). I could not figure out how to adjust the frequency for the V911S protocol, so I have not tried that. Does anyone have any tips or ideals for trying to get mine to bind? Thanks!

goebish wrote: @BirdBarber, @old4570, I converted the V911S protocol to use the CC2500 instead of the NRF24L01, that should fix your issues.
Test builds available here:
www.dropbox.com/sh/7k5f9f62ifucnd7/AACN4...pU_AMWWIKzdXOTa?dl=0

Please test & report

I upgraded my T8SG carbon edition using the v2 (no plus) version and get a white screen. Please help

cmPang

Hello,

Would it be possible to update the protocol so it supports the latest XK (Wltoys) planes namely A220 A210 A260 ?

I tried with the latest build from Hexfet (thx btw to continuing to provide nightly builds) no joy.

I tried with a OpenTX from a friend and it works well.

If it isn't to much work, could someone port the changes made by Pascal to deviation ?

Thx !