v120 setup help needed

merry xmas to all

help needed please

trying to setup my new v120d02s v2
easy to do with stock firmware

got model ini from conf thread

[channel1]
template=expo_dr
[mixer]
src=ELE
dest=Ch1
scalar=70
curvetype=expo
points=30,30

i do not understand the following:
"points=30,30"

TIA

Bm

edit: shame the first post of config thread doesn't contain any info on how to use ini

i'll try 30% pos expo

i think people forget we are not all programmers

thanks anyway guys

turns out the 120 is a dud anyway

Just bound v120 to devo7 it came with and it flies just fine.

When using Devo8s with Deviation:
servos seem eratic, one in particular
heli does not lift off

Bm

edit:

Have done standard and advanced setup, same results.
Have mini genius cp, trex setup and work fine.
This is first setup since upgrading to beta 3.1

i posted a working config for the v120d02s in this post here >> deviationtx.com/forum/model-configs/2428...er-for-devo-10#16392

it's for a 7e but you should be able to work from it to set up your own tx

phil