v120 setup help needed

More
24 Dec 2013 22:53 - 24 Dec 2013 23:20 #16988 by Birdman
v120 setup help needed was created by Birdman
merry xmas to all

help needed please

trying to setup my new v120d02s v2
easy to do with stock firmware

got model ini from conf thread

[channel1]
template=expo_dr
[mixer]
src=ELE
dest=Ch1
scalar=70
curvetype=expo
points=30,30

i do not understand the following:
"points=30,30"

TIA

Bm

edit: shame the first post of config thread doesn't contain any info on how to use ini

i'll try 30% pos expo
Last edit: 24 Dec 2013 23:20 by Birdman.

Please Log in or Create an account to join the conversation.

More
25 Dec 2013 02:42 - 25 Dec 2013 02:46 #16989 by Birdman
Replied by Birdman on topic v120 setup help needed
i think people forget we are not all programmers

thanks anyway guys

turns out the 120 is a dud anyway
Last edit: 25 Dec 2013 02:46 by Birdman.

Please Log in or Create an account to join the conversation.

More
25 Dec 2013 03:08 - 25 Dec 2013 03:38 #16990 by Birdman
Replied by Birdman on topic v120 setup help needed
Just bound v120 to devo7 it came with and it flies just fine.

When using Devo8s with Deviation:
servos seem eratic, one in particular
heli does not lift off

Bm

edit:

Have done standard and advanced setup, same results.
Have mini genius cp, trex setup and work fine.
This is first setup since upgrading to beta 3.1
Last edit: 25 Dec 2013 03:38 by Birdman.

Please Log in or Create an account to join the conversation.

More
25 Dec 2013 07:02 #16991 by FDR
Replied by FDR on topic v120 setup help needed
To be able to help, please post the whole model config.

The "30,30" means a symmetric 30% expo value...

Please Log in or Create an account to join the conversation.

More
25 Dec 2013 14:48 #17006 by HappyHarry
Replied by HappyHarry on topic v120 setup help needed
i posted a working config for the v120d02s in this post here >> deviationtx.com/forum/model-configs/2428...er-for-devo-10#16392

it's for a 7e but you should be able to work from it to set up your own tx

phil

Please Log in or Create an account to join the conversation.

Time to create page: 0.035 seconds
Powered by Kunena Forum