×

Notice

The forum is in read only mode.

Super CP

More
28 Mar 2013 03:16 #8171 by Mullson
Replied by Mullson on topic Super CP
If you have the two more switches this is for you.

File Attachment:

File Name: model3.ini
File Size:4 KB

Left to right, 1 Throttle hold, 2 gyro idle, 3 Idel Upp" 4 and some flight curves."
There are more turns and specials in this little "monster" if you can control it.
I saved some for rainy day.I haven't tried to be really aggressive. But I will get a v922 in a day or so I thought I would get the v922 and try them together.
but I got the HT8 before? strange I ordered it a week later.
Attachments:
More
31 Mar 2013 05:54 #8326 by CPpilot
Replied by CPpilot on topic Super CP
Hi Mullson,

Thanks for sharing. I have installed two more D/R switches. Do you have another config more tame? I am learning 3D flight...><
More
08 Dec 2013 18:50 #16418 by SilbernerSurfer
Replied by SilbernerSurfer on topic Super CP

coreire wrote: Throttle hold is controlled by RUDD D/R, cuts throttle but does not affect pitch.


What does this mean? Cuts of throttle when touching the rudder?

Why not using the HOLD toggle?
  • rbe2012
  • rbe2012's Avatar
  • Offline
  • So much to do, so little time...
More
08 Dec 2013 20:28 #16426 by rbe2012
Replied by rbe2012 on topic Super CP
Not when touching the rudder, but when flipping the RUDD D/R switch. Not every tx (like Devo8) has a HOLD switch, but the RUDD D/R is quite at the same position...
Time to create page: 0.027 seconds
Powered by Kunena Forum