Walkera QRW100S

First of all forgive me for what is only a basic understanding of the hobby. My experience to date being with FP Fly bar helis such as MSR.

I have a Devo 7e which I plan on using with a Walkera QRW100S Quad.

In simple terms could someone please help with detailing the settings and configuration as needed for this model and tx.

As I say, as I am inexperienced with regard to the details of sophisticated multi channel and mode transmitters if any instructions can be kept simple then so much the better.

I have a basic understanding of the concepts behind expo,curves etc but never having had to set up a transmitter its difficult to know where to start and what to do given the multitude of settings and menus!

Thanks in advance for any help.

Regards
Keith

Hello Keith,
thanks for joining our project but maybe you are not at the right place.
Deviation is a independent firmware for some Walkera Devo transmitter, but it does not support the Devo7 (7e is supported).
Most (if not all) users here do not use the stock firmware anymore so it is difficult to help you with this. Maybe somebody who has recently made this step is able to help, but it might be faster to place your question in another forum where you can find more know-how about the Walkera settings.

Keith,

I have deviation models for the Walkera QRW100S.

deviationtx.com/forum/model-configs/1680...ds-beginner-settings

deviationtx.com/forum/model-configs/1688...ds-standard-settings


Here are the settings I used to make the models. These are on my web site.

www.rcproreviews.com/walkera-qr-w100100s...rd-3d-mode-settings/


Note: You have to convert some values to deviation values.
Convert Walkera value to deviation value = Value X 2 -100
Example: Walkera value 82% = 64% deviation value