- Posts: 2631
Flysky AFHDS 2A, protocol as used i10, i6, iT4,
26 Apr 2016 12:05 - 26 Apr 2016 12:12 #47232
by goebish
That's only PWM servo refresh rate, which can be set between 50 and 400 Hz, "samples over the air" are sent every 3.85 ms (~260 Hz).
No idea for i-bus refresh rate, I haven't tried it yet, I'll try to measure that later.
Yes, that's useful, thanks, I was about to put the RX in the microwave oven as well to find it
Replied by goebish on topic Flysky AFHDS 2A, protocol as used i10, i6, iT4,
Fernandez wrote: Would it mean 50Hz samples= <20ms, variable latency? What would be the max samping rate?
How is that working? Is it real samples over the air, or the sample outputrate set at the RX?
That's only PWM servo refresh rate, which can be set between 50 and 400 Hz, "samples over the air" are sent every 3.85 ms (~260 Hz).
No idea for i-bus refresh rate, I haven't tried it yet, I'll try to measure that later.
Fernandez wrote: Not sure if it is usefull, I came across this for RSSI, it seems that it is sent back to the Tx alos.
www.insidegadgets.com/2015/09/03/adding-...-tgy-i6-transmitter/
Yes, that's useful, thanks, I was about to put the RX in the microwave oven as well to find it
Please Log in or Create an account to join the conversation.
26 Apr 2016 17:17 #47247
by Alexandro
Replied by Alexandro on topic Flysky AFHDS 2A, protocol as used i10, i6, iT4,
Nice, this is one of my High priority Numbers 
Rssi and RX Voltage
Rssi and RX Voltage
Please Log in or Create an account to join the conversation.
27 Apr 2016 07:44 #47293
by dc59
Aren't you in holiday ?
Replied by dc59 on topic Flysky AFHDS 2A, protocol as used i10, i6, iT4,
goebish wrote: I confirm RSSI is working, well, that's not a "real" RSSI as it doesn't report power strength in dB but rather a percentage of dropped packets, but that's good enough.
edit: also found how to enable/disable PPM on Ch1 output
Aren't you in holiday ?
Please Log in or Create an account to join the conversation.
04 May 2016 10:12 #47721
by goebish
Replied by goebish on topic Flysky AFHDS 2A, protocol as used i10, i6, iT4,
I am, cheers from Corsica mates
Please Log in or Create an account to join the conversation.
04 May 2016 10:34 #47723
by dc59
What a beautiful place it is.
Have a nice holiday~
Replied by dc59 on topic Flysky AFHDS 2A, protocol as used i10, i6, iT4,
goebish wrote: I am, cheers from Corsica mates
What a beautiful place it is.
Have a nice holiday~
Please Log in or Create an account to join the conversation.
14 May 2016 14:07 #48430
by goebish
Replied by goebish on topic Flysky AFHDS 2A, protocol as used i10, i6, iT4,
Back on track
I think I fully understand how telemetry works now, I've ordered an extra set of sensors to confirm, they're so cheap ... I'll give them to Alexandro when I'm done with this protocol in thanks for lending his TX.
I've to settle a few stuffs then back to work on this protocol ...
I think I fully understand how telemetry works now, I've ordered an extra set of sensors to confirm, they're so cheap ... I'll give them to Alexandro when I'm done with this protocol in thanks for lending his TX.
I've to settle a few stuffs then back to work on this protocol ...
Please Log in or Create an account to join the conversation.
14 May 2016 15:08 #48433
by dc59
Great news!
Thanks Goebish.
Replied by dc59 on topic Flysky AFHDS 2A, protocol as used i10, i6, iT4,
goebish wrote: Back on track
I think I fully understand how telemetry works now, I've ordered an extra set of sensors to confirm, they're so cheap ... I'll give them to Alexandro when I'm done with this protocol in thanks for lending his TX.
I've to settle a few stuffs then back to work on this protocol ...
Great news!
Thanks Goebish.
Please Log in or Create an account to join the conversation.
17 May 2016 19:27 - 17 May 2016 20:06 #48604
by goebish
Replied by goebish on topic Flysky AFHDS 2A, protocol as used i10, i6, iT4,
Quick update: bind stage is working (AFHDS-2A 2 way, arbitrary TX ID Ok), expect a test firmware soon
edit: wow, this is my 1000th post here !
edit: wow, this is my 1000th post here !
Please Log in or Create an account to join the conversation.
17 May 2016 21:37 #48609
by SeByDocKy
Super Can't wait
Replied by SeByDocKy on topic Flysky AFHDS 2A, protocol as used i10, i6, iT4,
goebish wrote: Quick update: bind stage is working (AFHDS-2A 2 way, arbitrary TX ID Ok), expect a test firmware soon
edit: wow, this is my 1000th post here !
Super
Can't wait Please Log in or Create an account to join the conversation.
19 May 2016 10:09 #48695
by goebish
Replied by goebish on topic Flysky AFHDS 2A, protocol as used i10, i6, iT4,
Here's a test build, based on latest nightly:
Devo 7e: www.dropbox.com/s/n0s5uy5hxprugvn/deviat...0.0-e7e30d3.zip?dl=0
Devo 10: www.dropbox.com/s/8vngcxhfww3c7bu/deviat...0.0-e7e30d3.zip?dl=0
Source: github.com/DeviationTX/deviation/compare...ish:protocol_afhds2a
It is a test build and should be treated as such, don't attempt to fly your new shinny machine too far with it
- no failsafe
- only RX voltage and RSSI (in dB) telemetry
- RXID is stored in protocol options, don't change it manually !
Please report
Devo 7e: www.dropbox.com/s/n0s5uy5hxprugvn/deviat...0.0-e7e30d3.zip?dl=0
Devo 10: www.dropbox.com/s/8vngcxhfww3c7bu/deviat...0.0-e7e30d3.zip?dl=0
Source: github.com/DeviationTX/deviation/compare...ish:protocol_afhds2a
It is a test build and should be treated as such, don't attempt to fly your new shinny machine too far with it
- no failsafe
- only RX voltage and RSSI (in dB) telemetry
- RXID is stored in protocol options, don't change it manually !
Please report
Please Log in or Create an account to join the conversation.
19 May 2016 14:47 - 19 May 2016 14:51 #48715
by goebish
Replied by goebish on topic Flysky AFHDS 2A, protocol as used i10, i6, iT4,
Thanks, I renamed the .mod file in the archive.
With the iA10 I've -60d when I'm near (same as with i10 transmitter) then it drops when I move away. Maybe the ia6 doesn't report RSSI in dB, but only an error rate, we'll try that later.
Does it stay the same if you move the transmitter 1 or 2 rooms away from the RX ?3, RSSI always "0d" , don't know what's wrong?
With the iA10 I've -60d when I'm near (same as with i10 transmitter) then it drops when I move away. Maybe the ia6 doesn't report RSSI in dB, but only an error rate, we'll try that later.
Hmm I'm not sure what's wrong, I'm using the frsky telemetry model, with values that doesn't require HAS_EXTENDED_TELEMETRY, I'll try with the emulator, I know I should have bought a 7e when it was $36 on ebay1, I got some problem with this firmware, I can't get into "Telemetry monitor" page,after I pressed "ENT" for 3 times , my 7E reboot itself.
Please Log in or Create an account to join the conversation.
19 May 2016 15:15 - 19 May 2016 15:30 #48716
by goebish
Replied by goebish on topic Flysky AFHDS 2A, protocol as used i10, i6, iT4,
Ok, trying to go to the telemetry screen with the 7e emu crash it as well, so I should be able to find what's wrong
edit: it also happens when I select the FrSky-X protocol then try to go to the telemetry screen, hexfet, if you're reading, any idea ?
I'll try with the DSM telemetry model, looks like it should fit the values afhds-2a report.
edit: it also happens when I select the FrSky-X protocol then try to go to the telemetry screen, hexfet, if you're reading, any idea ?
I'll try with the DSM telemetry model, looks like it should fit the values afhds-2a report.
Please Log in or Create an account to join the conversation.
Time to create page: 0.102 seconds
-
Home
-
Forum
-
Development
-
Protocol Development
- Flysky AFHDS 2A, protocol as used i10, i6, iT4,