- Posts: 2631
CX 10D Traces
- goebish
-
- Offline
- I Void Warranties
Less
More
17 Jan 2017 15:21 #58082
by goebish
Replied by goebish on topic CX 10D Traces
Thanks for the report, and welcome here hine!
Please Log in or Create an account to join the conversation.
- hine
-
- Offline
Less
More
- Posts: 3
17 Jan 2017 15:36 #58083
by hine
Replied by hine on topic CX 10D Traces
Thanks a lot, goebish.
Another Procedure:
a) Turn on CX-10WD
b) Turn on DEVO7E and Set throttle to 0%
c) Automatically go into binding process
d) Set throttle to 100% then Change the HOLD switch's position.
Another Procedure:
a) Turn on CX-10WD
b) Turn on DEVO7E and Set throttle to 0%
c) Automatically go into binding process
d) Set throttle to 100% then Change the HOLD switch's position.
Please Log in or Create an account to join the conversation.
- Stefan_Z
-
- Offline
Less
More
- Posts: 20
17 Jan 2017 15:48 #58084
by Stefan_Z
Replied by Stefan_Z on topic CX 10D Traces
By the way - there IS a way to manually control the motors with the original remote.
Start motors: left stick -> left-bottom + right stick -> right-bottom
Stop motors: left stick -> left-bottom + right stick -> right-bottom (for 2 seconds)
Start motors: left stick -> left-bottom + right stick -> right-bottom
Stop motors: left stick -> left-bottom + right stick -> right-bottom (for 2 seconds)
Please Log in or Create an account to join the conversation.
- goebish
-
- Offline
- I Void Warranties
Less
More
- Posts: 2631
17 Jan 2017 15:53 #58085
by goebish
Replied by goebish on topic CX 10D Traces
If the WD has manual control as well then it should work as this doesn't involve any extra flags ...
Please Log in or Create an account to join the conversation.
- ajtank
-
- Offline
Less
More
- Posts: 278
17 Jan 2017 15:54 #58086
by ajtank
Replied by ajtank on topic CX 10D Traces
Goebish:
I have uploaded the 5 requested captures. During take-off, the quad will be armed for a second or two before it accelerates and ascends. Next time if you find my captures questionable please tell me to redo instead of proceeding a test build. I am sorry for your additional efforts.
Hine:
I have not yet tested the flip before my quad crashed and lost one of the props. I rely on you for further flight tests.
I have uploaded the 5 requested captures. During take-off, the quad will be armed for a second or two before it accelerates and ascends. Next time if you find my captures questionable please tell me to redo instead of proceeding a test build. I am sorry for your additional efforts.
Hine:
I have not yet tested the flip before my quad crashed and lost one of the props. I rely on you for further flight tests.
Please Log in or Create an account to join the conversation.
- goebish
-
- Offline
- I Void Warranties
Less
More
- Posts: 2631
17 Jan 2017 15:56 #58087
by goebish
Replied by goebish on topic CX 10D Traces
Flip should be working already, I'll take a look at your new captures.
Please Log in or Create an account to join the conversation.
- goebish
-
- Offline
- I Void Warranties
Less
More
- Posts: 2631
17 Jan 2017 15:59 #58088
by goebish
Replied by goebish on topic CX 10D Traces
... and don't be sorry, that was expected 
Please Log in or Create an account to join the conversation.
- goebish
-
- Offline
- I Void Warranties
Less
More
- Posts: 2631
17 Jan 2017 16:25 - 17 Jan 2017 16:29 #58089
by goebish
Replied by goebish on topic CX 10D Traces
Ok, now I understand how it works ... I've to check what's the best way to implement it as we've switches on our transmitters, not temporary push buttons ...
I still need some extra captures for the CX10D as it doesn't use the same flags.
Stefan_Z, please make the same captures when you've a chance:
www.deviationtx.com/forum/protocol-devel...races?start=20#58078
I still need some extra captures for the CX10D as it doesn't use the same flags.
Stefan_Z, please make the same captures when you've a chance:
www.deviationtx.com/forum/protocol-devel...races?start=20#58078
Last edit: 17 Jan 2017 16:29 by goebish.
Please Log in or Create an account to join the conversation.
- ajtank
-
- Offline
Less
More
- Posts: 278
17 Jan 2017 16:33 #58090
by ajtank
Replied by ajtank on topic CX 10D Traces
Glad that you have retrieved my captures because the google drive server suddenly stops working.
It is not difficult to implement temporary push buttons by setting virtual channels on the trim buttons.
It is not difficult to implement temporary push buttons by setting virtual channels on the trim buttons.
Please Log in or Create an account to join the conversation.
- goebish
-
- Offline
- I Void Warranties
Less
More
- Posts: 2631
17 Jan 2017 17:09 #58092
by goebish
Replied by goebish on topic CX 10D Traces
Updated the test build for CX10WD:
www.dropbox.com/sh/zmbdc0t3q0u30on/AADEb...aMLWyCwhgj1egWa?dl=0
Auto land is engaged when channel 5 is switched to low position (less than 0)
Auto take off is engaged when channel 5 is switched to high position (more than 0)
Just leave this channel at 0 if you do not want to use auto land / take off features.
www.dropbox.com/sh/zmbdc0t3q0u30on/AADEb...aMLWyCwhgj1egWa?dl=0
Auto land is engaged when channel 5 is switched to low position (less than 0)
Auto take off is engaged when channel 5 is switched to high position (more than 0)
Just leave this channel at 0 if you do not want to use auto land / take off features.
Please Log in or Create an account to join the conversation.
- goebish
-
- Offline
- I Void Warranties
Less
More
- Posts: 2631
17 Jan 2017 20:41 - 18 Jan 2017 00:08 #58097
by goebish
Replied by goebish on topic CX 10D Traces
I updated the build again for CX10D this time, same channel mapping than CX10WD.
Stefan_Z please check this version before making additional captures, as they might not be required ...
Channel 5: land / manual / take off
Channel 6: flip
.. also, I reversed rudder & elevator channels, should be fine with default mixer settings now.
Stefan_Z please check this version before making additional captures, as they might not be required ...
Channel 5: land / manual / take off
Channel 6: flip
.. also, I reversed rudder & elevator channels, should be fine with default mixer settings now.
Last edit: 18 Jan 2017 00:08 by goebish.
Please Log in or Create an account to join the conversation.
- ajtank
-
- Offline
Less
More
- Posts: 278
18 Jan 2017 14:11 - 18 Jan 2017 14:34 #58119
by ajtank
Replied by ajtank on topic CX 10D Traces
I found the missing prop and tested the new build. Rudder and elevator are now normal.
Take off
a) If I initially set ch5=0, it will not ascend even I push throttle to 100%.
b) If I set ch5=100 to take off, I can use throttle to ascend or descend. If I then change ch5=0, throttle operation remains the same.
c) If I set ch5=-100 during the flight, quad will descend quickly and land.
[channel5]
template=simple
[mixer]
src=virt1
dest=ch5
[trim5]
src=virt1
pos=TRIM_L+
neg=TRIM_L-
step=100
value=0,0,0
Flip
I am unable to flip. I mean the quad, not myself
Take off
a) If I initially set ch5=0, it will not ascend even I push throttle to 100%.
b) If I set ch5=100 to take off, I can use throttle to ascend or descend. If I then change ch5=0, throttle operation remains the same.
c) If I set ch5=-100 during the flight, quad will descend quickly and land.
[channel5]
template=simple
[mixer]
src=virt1
dest=ch5
[trim5]
src=virt1
pos=TRIM_L+
neg=TRIM_L-
step=100
value=0,0,0
Flip
I am unable to flip. I mean the quad, not myself
Last edit: 18 Jan 2017 14:34 by ajtank.
Please Log in or Create an account to join the conversation.
- goebish
-
- Offline
- I Void Warranties
Less
More
- Posts: 2631
18 Jan 2017 15:21 #58121
by goebish
So ... for the CX10WD, everything is fine except for flip ?
Replied by goebish on topic CX 10D Traces
This is normal, I think you can still "manually" arm or disarm the motors as Stephan_Z stated.a) If I initially set ch5=0, it will not ascend even I push throttle to 100%.
Stefan_Z wrote: By the way - there IS a way to manually control the motors with the original remote.
Start motors: left stick -> left-bottom + right stick -> right-bottom
Stop motors: left stick -> left-bottom + right stick -> right-bottom (for 2 seconds)
So ... for the CX10WD, everything is fine except for flip ?
Please Log in or Create an account to join the conversation.
- ajtank
-
- Offline
Less
More
- Posts: 278
18 Jan 2017 15:28 - 18 Jan 2017 15:35 #58122
by ajtank
Replied by ajtank on topic CX 10D Traces
Yes indeed I can arm and disarm manually by means of the stick positions when ch5=0. I overlooked that. However it seems the ascend rate is not as quick as when ch5=100. The stock transmitter behaves the same. I love the auto take off better.
Yes all work fine except flip.
Yes all work fine except flip.
Last edit: 18 Jan 2017 15:35 by ajtank.
Please Log in or Create an account to join the conversation.
- goebish
-
- Offline
- I Void Warranties
Less
More
- Posts: 2631
18 Jan 2017 15:39 #58123
by goebish
Replied by goebish on topic CX 10D Traces
I had a further look at the capture, I don't understand why flip doesn't work.
Please Log in or Create an account to join the conversation.
- ajtank
-
- Offline
Less
More
- Posts: 278
18 Jan 2017 15:51 - 18 Jan 2017 15:54 #58125
by ajtank
Replied by ajtank on topic CX 10D Traces
I re-tested again and flip really did not work. The quad should ascend a bit and flip in the direction of the right stick movement but it just does not ascend and keeps on flying without flipping. Shall I make a capture of flip button + right stick movement?
Last edit: 18 Jan 2017 15:54 by ajtank.
Please Log in or Create an account to join the conversation.
- goebish
-
- Offline
- I Void Warranties
Less
More
- Posts: 2631
18 Jan 2017 15:57 #58127
by goebish
Replied by goebish on topic CX 10D Traces
try that:
- take off
- enable flip
- push right stick to the desired flip direction
- disable flip
- release stick
- take off
- enable flip
- push right stick to the desired flip direction
- disable flip
- release stick
Please Log in or Create an account to join the conversation.
- ajtank
-
- Offline
Less
More
- Posts: 278
18 Jan 2017 16:13 #58128
by ajtank
Replied by ajtank on topic CX 10D Traces
No it didn't work.
Please Log in or Create an account to join the conversation.
- goebish
-
- Offline
- I Void Warranties
Less
More
- Posts: 2631
18 Jan 2017 16:25 #58129
by goebish
Replied by goebish on topic CX 10D Traces
Weird, that's the exact same flag than the older CX10 protocols (set 1 unused bit of the rudder channel), it's the same for D & WD ... I really wonder why it wouldn't work.
I already have a capture from Stefan_Z with take off + flight + flip + land, nothing particular here.
I already have a capture from Stefan_Z with take off + flight + flip + land, nothing particular here.
Please Log in or Create an account to join the conversation.
- ajtank
-
- Offline
Less
More
- Posts: 278
18 Jan 2017 16:28 - 18 Jan 2017 16:28 #58130
by ajtank
Replied by ajtank on topic CX 10D Traces
Let's wait for the other CX10 owners' feedback.
My wife finds it amusing to see the quad bouncing up and down (auto take off and land) by flipping a switch.
My wife finds it amusing to see the quad bouncing up and down (auto take off and land) by flipping a switch.
Last edit: 18 Jan 2017 16:28 by ajtank.
Please Log in or Create an account to join the conversation.
Time to create page: 0.068 seconds
-
Home
-
Forum
-
Development
-
Protocol Development
- CX 10D Traces