- Posts: 3333
Deviation v5.0.0 build with latest protocols
- vlad_vy
- Topic Author
- Offline
(07.01.2017) Firmware DFU file only, you can get other components from official v5.0.0 release.
www.deviationtx.com/downloads-new/category/398-deviation-5-0-0
Files deleted, see below...
Please Log in or Create an account to join the conversation.
- vlad_vy
- Topic Author
- Offline
- Posts: 3333
(10.01.2017) Firmware DFU file only, you can get other components from official v5.0.0 release.
www.deviationtx.com/downloads-new/category/398-deviation-5-0-0
Files deleted, see below...
Please Log in or Create an account to join the conversation.
- vlad_vy
- Topic Author
- Offline
- Posts: 3333
(13.01.2017) Firmware DFU file only, you can get other components from official v5.0.0 release.
www.deviationtx.com/downloads-new/category/398-deviation-5-0-0
Files deleted, see below...
Please Log in or Create an account to join the conversation.
- aMax
- Offline
- Posts: 776
Well, only read about changes on X_protocol.
There is now significant difference to my DFT/FLD-02 of about plus 11 at my typical test distance & environment.
This is no good, because all my crashes happend with my Devo.
Edit:
My last used build was dated 02 Dec 2016 and there I had identical readings
Devo7e, TaranisQ X7, R9M , 4in1 MM, Futaba FC18plusV3.2 & DFT/FLD-02
Please Log in or Create an account to join the conversation.
- vlad_vy
- Topic Author
- Offline
- Posts: 3333
P.S. I see you already ask this question. 02 Dec 2016 21:09
Please Log in or Create an account to join the conversation.
- aMax
- Offline
- Posts: 776
hexfet does.on the nightlys. I do not use the nightly builds anymore. And the bug tracker does not tell anything about it.
Ok. will revert to the older one.
Edit: Yes ask this before on 02 Dec 2016, because it was the first time the readings were equal.
Devo7e, TaranisQ X7, R9M , 4in1 MM, Futaba FC18plusV3.2 & DFT/FLD-02
Please Log in or Create an account to join the conversation.
- hexfet
- Offline
- Posts: 1868
The change to D8 on Dec 2 corrected the sequence number transmitted to acknowledge receipt of telemetry packets. That shouldn't affect the RSSI seen at the receiver. Possibly Frsky lowers the RSSI reported in telemetry if it's getting sequence errors, but that seems unlikely.
commit abf225cc7bfa0b79667cbc4764214ad6576b888c
Author: Mike Meyer <mwm@mired.org>
Date: Mon Jun 22 06:17:56 2015 -0500
Fix the RSSI telemetry data to display DbM, not skewed percentage value
diff --git a/src/protocol/frsky2way_cc2500.c b/src/protocol/frsky2way_cc2500.c
--- a/src/protocol/frsky2way_cc2500.c
+++ b/src/protocol/frsky2way_cc2500.c
@@ -222,1 +222,1 @@
- Telemetry.value[TELEM_FRSKY_RSSI] = (pkt[5]*10 - 310)*12987/10000; // max value 108, min value = 31
+ Telemetry.value[TELEM_FRSKY_RSSI] = pkt[5]; // Value in Db
Please Log in or Create an account to join the conversation.
- aMax
- Offline
- Posts: 776
In a few weeks,hopefully, I have a new radio, a Taranis Q X7, to compare even the D16 protocol.
Then I have the chance to test the Devo against two Frsky devices. Meanwhile I stay tuned.
Devo7e, TaranisQ X7, R9M , 4in1 MM, Futaba FC18plusV3.2 & DFT/FLD-02
Please Log in or Create an account to join the conversation.
- mellowvision
- Offline
- Posts: 29
Please Log in or Create an account to join the conversation.
- vlad_vy
- Topic Author
- Offline
- Posts: 3333
When you enter the protocol settings try freq-fine tuning, try -10, -20, -30, -40 and +10, +20 etc.... and you should be good to bind. Next find the sweet spot in the middle of the range. Increase freq-fine until the light on the receiver starts flickering slower/not smoothly anymore. Remember the value. Decrease freq-fine until it happens again. Then set it to a value in between the positive and negative values you got earlier.
Please Log in or Create an account to join the conversation.
- mellowvision
- Offline
- Posts: 29
Please Log in or Create an account to join the conversation.
- Artus
- Offline
- Posts: 105
Furious Mini use protokoll "D" - it is in deviation frsky V8
DEVO10 4in1 V5.0 DEVO F12E 4in1 V5
Align TREX 100 (3) Hubsan Q4
Walkera QRW100S Walkera QRX 350 Pro (FPV)
Walkera QRX 350 PREMIUM
DIY 100 mm Micro QUAD - HGLRCF4F5PRO with INAV
Please Log in or Create an account to join the conversation.
- mellowvision
- Offline
- Posts: 29
Artus wrote: I have a Frksy .. X4RSB - binding is ok telemetry is working with DEVO 10 and F12E
Furious Mini use protokoll "D" - it is in deviation frsky V8
Thanks Artus. it was your comment that led to the answer... I finally got it to bind. it took several attempts for some reason but in the end it did bind. I had to use the "FRSKY" protocol option, not the FRSKY V8 or FRSKY X. Only the plain FRSKY setting will bind. I tested this on 2 RX / Piko combinations.
Please Log in or Create an account to join the conversation.
- Artus
- Offline
- Posts: 105
DEVO10 4in1 V5.0 DEVO F12E 4in1 V5
Align TREX 100 (3) Hubsan Q4
Walkera QRW100S Walkera QRX 350 Pro (FPV)
Walkera QRX 350 PREMIUM
DIY 100 mm Micro QUAD - HGLRCF4F5PRO with INAV
Please Log in or Create an account to join the conversation.
- vlad_vy
- Topic Author
- Offline
- Posts: 3333
(19.01.2017) Firmware DFU file only, you can get filesystem from official Devo10 v5.0.0 release.
www.deviationtx.com/downloads-new/category/398-deviation-5-0-0
File deleted, see below...
Please Log in or Create an account to join the conversation.
- vlad_vy
- Topic Author
- Offline
- Posts: 3333
Add "Devo 12e", from vladislavy
(19.01.2017) Firmware DFU file only, you can get other components from official v5.0.0 release. For Devo 12e you can use Devo 10 filesystem.
www.deviationtx.com/downloads-new/category/398-deviation-5-0-0
Files deleted, see below...
Please Log in or Create an account to join the conversation.
- Deal57
- Offline
- Posts: 857
Deviation Devo7e 3way switch mod, A7105, NRF24L01
Devo6s 2x2 switch mod, trim mod, haptic, multimodule, A7105, NRF24L01, CC2500
Devo12e 4-in-1 with voice mod -- it speaks!!
Please Log in or Create an account to join the conversation.
- vlad_vy
- Topic Author
- Offline
- Posts: 3333
Please Log in or Create an account to join the conversation.
- vlad_vy
- Topic Author
- Offline
- Posts: 3333
"Devo 7e-256" capabilities updated to current Nightly builds state. New version of "hardware.ini" file attached to archive.
Will be nice, if anybody can test how it work.
(20.01.2017) Firmware DFU and emulator EXE files only, you can get other components from official Devo 7e v5.0.0 release.
www.deviationtx.com/downloads-new/category/398-deviation-5-0-0
Files deleted, see below...
Please Log in or Create an account to join the conversation.
- Deal57
- Offline
- Posts: 857
vlad_vy wrote: I can integrate into this build "Devo 12e". Can anybody test it???
(19.01.2017) Firmware DFU file only, you can get filesystem from official Devo10 v5.0.0 release.
...
Loaded this up on my Devo 12E and it looks like everything is running as expected. I have a 4-in-1 in mine, and all the protocols are visible and appear to be usable. I'll load up some models and fly some around the house tonight. First installed the DFU, then copied the Devo 10 v5.0.0 release without a hitch.
I flew a couple of small quads around the house tonight and they worked well. Channel assignments are good and I used some Ini files converted from my Devo 7e just fine. I'm still getting used to all these switches and pots, and they all responded as expected. I couldn't really tell for certain that everything is crisp, but it seems so. I'll get some outside time tomorrow.
Once again, thanks for your dedicated efforts.
Deviation Devo7e 3way switch mod, A7105, NRF24L01
Devo6s 2x2 switch mod, trim mod, haptic, multimodule, A7105, NRF24L01, CC2500
Devo12e 4-in-1 with voice mod -- it speaks!!
Please Log in or Create an account to join the conversation.
- Home
- Forum
- Development
- Builds
- Deviation v5.0.0 build with latest protocols