Bugs 3 mini

Thanks,will give it a shot..

Is the fix in the same build..

goebish wrote: Test build updated, angle/acro mode should be working now.[/quote

Confirmed,Acro is working just like stock,We can't transition from acro to angle in flight,it has to be rebound in it's respective mode.Something else also to note the disarm won't work if the throttle has value.So warning to all novice,shut your throttle fully down in order to disarm it with channel 5.Awesome job Goebish,thanks again..

Too bad we can't modify the firmware on the quad.

Thank you Goebish..

Thanks Goebish,I just flew with the devo 10 with build dd90e6a and the flips wouldn't turn off after enabled,in other words if I gave it too much stick in either direction it would flip.It would happen if you would bind the quad to the tx with channel 7 enabled and once in flight you cannot disable it.I was also doing some funnels and the bugs would act eratic like it got gyro drunk.I will simulate this with the stock tx tomorrow to see if I get the same behavior.

goebish wrote: Let me know if I should disable the flip flag while the quad is disarmed, but on stock transmitter it can be enabled anytime, stock transmitter doesn't know if the quad is armed (but Deviation does).[/qu

If it fixes the in flight glitch where we can't toggle it off,I think disabling it would be the best option.

goebish wrote: ok, build updated.

Thanks bro,your hard work and time is greatly appreciated.I will update everything with the telemetry and do a test flight..

Just tried the latest build with my devo 10 and it spontaneously had phantom inputs especially with the throttle.It would also lose bind while sitting idle and it would beep.

goebish wrote: I can't reproduce the issue.

I added 2 test builds for Devo10, one is fixed_id, the other one no_telemetry, can you tell me if one of them fixes the problem ?

The no telemetry file seemed to fix it,the fixed id file was still a bit twerky..