Helicopter and Quad Models

More
05 Jan 2014 16:42 - 01 May 2014 05:03 #17995 by Tom Z
Helicopter and Quad Models was created by Tom Z
Here is a complete list of the Helicopter and Quad models I have posted on this site.


Update: 1/8/2014

I just made models for V4 firmware for all of my models.
I have V3 firmware models also for most of my models. I stopped making V3 models when V4 firmware was released due to it is the most stable version and I can now make one model for all these transmitters: DEVO 6/6S/8/8S/10/12/12S.

* Devo 7e Transmitter

My V4 firmware models will bind and work with the Devo 7e using V4 firmware only.
My custom GUI in the model file is also made to use with the Devo 7e.
The issue is that the Devo 7e has less switches. You will only have ST-1. Also you will not have DR/EXPO 0 and DR/EXPO 1, you will only have DR/EXPO 0.
Without the extra switches you will not be able to use the settings I made for ST-2 and DR/EXPO 1.


Fixed ID

All of my models do not use a Fixed ID.
If you used a Fixed ID with the original Walkera firmware you must clear the Fixed ID in the Receiver with the Bind Plug.
If you don't clear the Fixed ID the model will not bind.

If you want to use a Fixed ID you can enter the same Fixed ID you had for the original Walkera firmware.

Example: Your original Walkera firmware Fixed ID was: 123456

Assign the Deviation Fixed ID: 123456


You can also assign any Fixed ID that you want to use. You don't have to use the original Walkera firmware Fixed ID. Clear the Fixed ID in the Receiver with the Bind Plug then assign any Fixed ID that you want to use.



Special thanks to the following people for helping me out with my questions, checking/testing/making some settings for me.

RandMental, PhracturedBlue, FDR, WheresWaldo, rbe2012, domcars0, JJ1984, Scott Bishop, ave1, Syrabane, micro.






Walkera Helicopter and Quad Models




Walkera CP Helicopters - Ultra Beginner Settings

Walkera V120D02S
Walkera V120D02S V2
Walkera Mini CP
Walkera Super CP
Walkera Genius CP V1/V2
Walkera V100D08
Walkera Master CP
Walkera V450D01/D03

deviationtx.com/forum/model-configs/2709...ra-beginner-settings


Walkera CP Helicopters - Beginner Settings

Walkera V120D02S
Walkera V120D02S V2
Walkera Mini CP
Walkera Super CP
Walkera Genius CP V1/V2
Walkera V100D08

deviationtx.com/forum/model-configs/1665...rs-beginner-settings


Walkera CP Helicopters - Standard Settings

Walkera V120D02S
Walkera V120D02S V2
Walkera Mini CP
Walkera Super CP
Walkera Genius CP V1/V2
Walkera V100D08

deviationtx.com/forum/model-configs/1687...rs-standard-settings


Walkera CP Helicopters - 3D Settings

Walkera V120D02S
Walkera V120D02S V2
Walkera Mini CP
Walkera Super CP
Walkera Genius CP V1/V2
Walkera V100D08

deviationtx.com/forum/model-configs/2686...icopters-3d-settings


Walkera Master CP - 3D Settings

deviationtx.com/forum/model-configs/1689...aster-cp-3d-settings


Walkera Master CP - Beginner Settings

deviationtx.com/forum/model-configs/2571...cp-beginner-settings


Walkera Master CP - Standard Settings

deviationtx.com/forum/model-configs/2572...cp-standard-settings


Walkera V200D03 - Standard Settings

deviationtx.com/forum/model-configs/2607...03-standard-settings


Walkera V200D03 - Beginner Settings

deviationtx.com/forum/model-configs/2606...03-beginner-settings


Walkera 4F200LM - Standard Settings

deviationtx.com/forum/model-configs/2663...lm-standard-settings


Walkera 4F200LM - Beginner Settings

deviationtx.com/forum/model-configs/2662...lm-beginner-settings


Walkera G400 GPS

deviationtx.com/forum/model-configs/2699-walkera-g400-gps


Walkera V450D01/D03 - Beginner Settings

deviationtx.com/forum/model-configs/2578...03-beginner-settings


Walkera V450D01/D03 - Standard Settings

deviationtx.com/forum/model-configs/2579...03-standard-settings


Walkera V450D01/D03 - 3D Settings

deviationtx.com/forum/model-configs/2580...0d01-d03-3d-settings


Walkera FP Helicopters - Beginner settings

Walkera Super FP
Walkera Genius FP
Walkera V200D01 w/Devo Receiver RX2437V-D
Walkera V200D02 w/Devo Receiver RX2440V-D

deviationtx.com/forum/model-configs/1698...fp-beginner-settings


Walkera FP Helicopters - Standard Settings

Walkera Super FP
Walkera Genius FP
Walkera V200D01 w/Devo Receiver RX2437V-D
Walkera V200D02 w/Devo Receiver RX2440V-D

deviationtx.com/forum/model-configs/2573...fp-standard-settings


Walkera V100D01 - Standard Settings

deviationtx.com/forum/model-configs/2655...01-standard-settings


Walkera V100D01 - Beginner Settings

deviationtx.com/forum/model-configs/2654...01-beginner-settings


Walkera Quads - Beginner Settings

Walkera QR Ladybird V1/V2
Walkera Hoten X
Walkera QR Infra X
Walkera QR Spacewalker
Walkera QR Scorpion
Walkera QR W100/100S
Walkera UFO MX400S
Walkera QR X400

deviationtx.com/forum/model-configs/1680...ds-beginner-settings


Walkera Quads - Standard Settings

Walkera QR Ladybird V1/V2
Walkera Hoten X
Walkera QR Infra X
Walkera QR Spacewalker
Walkera QR Scorpion
Walkera QR W100/100S
Walkera UFO MX400S
Walkera QR X400

deviationtx.com/forum/model-configs/1688...ds-standard-settings


Walkera QR X350 - model made by Parkkert

deviationtx.com/forum/model-configs/2270...ig-for-devo-10#14582



.
Last edit: 01 May 2014 05:03 by Tom Z.

Please Log in or Create an account to join the conversation.

More
13 Jan 2014 21:45 - 01 May 2014 05:15 #18488 by Tom Z
Replied by Tom Z on topic Blade Helicopter and Quad Models
Blade Helicopter and Quad Models



Blade Nano CPX - Ultra Beginner Settings

deviationtx.com/forum/model-configs/2728...ra-beginner-settings


Blade Nano CP X - Beginner Settings

deviationtx.com/forum/model-configs/1710...-x-beginner-settings


Blade Nano CP X - Standard Settings

deviationtx.com/forum/model-configs/1711...-x-standard-settings


Blade Nano CP X - 3D Settings

deviationtx.com/forum/model-configs/2688...ano-cp-x-3d-settings


Blade mCPX V1/V2 - Ultra Beginner Settings

deviationtx.com/forum/model-configs/2727...ra-beginner-settings


Blade mCPX V1/V2/BL - Beginner Settings

deviationtx.com/forum/model-configs/1700...px-beginner-settings


Blade mCPX V1/V2/BL - Standard Settings

deviationtx.com/forum/model-configs/1706...px-standard-settings


Blade mCPX V1/V2/BL - 3D Settings

deviationtx.com/forum/model-configs/2687...v1-v2-bl-3d-settings


Blade 130X - Ultra Beginner Settings

deviationtx.com/forum/model-configs/2728...ra-beginner-settings


Blade 130 X - Beginner Settings

deviationtx.com/forum/model-configs/2588...-x-beginner-settings


Blade 130 X - Standard Settings

deviationtx.com/forum/model-configs/1714...-x-standard-settings


Blade 130 X - 3D Settings

deviationtx.com/forum/model-configs/2689...de-130-x-3d-settings


Blade FP Helicopters - Beginner Settings

Blade SR 120
Blade mSR/mSR-X
Blade mCX/mCX2

deviationtx.com/forum/model-configs/2614...sr-beginner-settings


Blade FP Helicopters - Standard Settings

Blade SR 120
Blade mSR/mSR-X
Blade mCX/mCX2

deviationtx.com/forum/model-configs/2615...sr-standard-settings


Blade mQX

deviationtx.com/forum/model-configs/2586-blade


Blade Nano QX - model made by fabien

deviationtx.com/forum/model-configs/2646-blade-nano-qx


Blade 180 QX HD - model made by kreidler

deviationtx.com/forum/model-configs/2696-blade-180-qx-hd


Blade 350 QX - model made by fabien

deviationtx.com/forum/model-configs/2187...rizon?start=20#19329



.
Last edit: 01 May 2014 05:15 by Tom Z.

Please Log in or Create an account to join the conversation.

More
13 Jan 2014 21:45 - 01 May 2014 13:35 #18489 by Tom Z
Replied by Tom Z on topic Align Helicopter and Quad Models
Align Helicopters




Align T-Rex 150 DFC - Ultra Beginner Settings

deviationtx.com/forum/model-configs/2714...ra-beginner-settings


Align T-Rex 150 DFC - Beginner Settings

deviationtx.com/forum/model-configs/2593...fc-beginner-settings


Align T-Rex 150 DFC - Standard Settings

deviationtx.com/forum/model-configs/2594...fc-standard-settings


Align T-Rex 150 DFC - 3D Settings

deviationtx.com/forum/model-configs/2595...-150-dfc-3d-settings



.
Last edit: 01 May 2014 13:35 by Tom Z.

Please Log in or Create an account to join the conversation.

More
16 Jan 2014 14:17 - 01 May 2014 05:15 #18564 by Tom Z
Replied by Tom Z on topic Helicopter and Quad Models
Nine Eagles Solo Helicopters

* (requires telemetry module)



Nine Eagles Solo Pro 180 3D (318A) - Beginner Settings

deviationtx.com/forum/model-configs/2719...80-beginner-settings


Nine Eagles Solo Pro 180 3D (318A) - Standard Settings

deviationtx.com/forum/model-configs/2720...80-standard-settings


Nine Eagles Solo Pro 125 - Beginner Settings

deviationtx.com/forum/model-configs/2741...25-beginner-settings


Nine Eagles Solo Pro 125 - Standard Settings

deviationtx.com/forum/model-configs/2742...25-standard-settings



.
Last edit: 01 May 2014 05:15 by Tom Z.

Please Log in or Create an account to join the conversation.

More
20 Jan 2014 15:35 - 18 Feb 2014 06:17 #18777 by Tom Z
Last edit: 18 Feb 2014 06:17 by Tom Z.

Please Log in or Create an account to join the conversation.

More
17 Feb 2014 20:01 - 14 Apr 2014 15:41 #20467 by Tom Z
Replied by Tom Z on topic Helicopter and Quad Models
Standard Mixer

I also made some models in the Standard Mixer. See my post here: deviationtx.com/forum/model-configs/3033...de-in-standard-mixer


I made the models in the Standard Mixer which is easy to change the settings and is similar to the menus and options we are use to.
I made all my other models in the Advanced Mixer due to the Standard Mixer doesn't have all the features and options I need.

I wanted to offer some of my models in the Standard Mixer format to help out people who are having problems with the Advanced Mixer format due to it is completely different than the menus and options we are use to.

* I will not be making any more models made in the Standard Mixer

.
Last edit: 14 Apr 2014 15:41 by Tom Z.

Please Log in or Create an account to join the conversation.

More
17 Feb 2014 20:01 - 01 May 2014 13:36 #20468 by Tom Z
Replied by Tom Z on topic Helicopter and Quad Models
Models with 3 Difficulty Modes

These models have Beginner, Standard, and 3D Settings.


Walkera CP Helicopters

Walkera V120D02S
Walkera V120D02S V2
Walkera Mini CP
Walkera Super CP
Walkera Genius CP V1/V2
Walkera V100D08
Walkera Master CP

deviationtx.com/forum/model-configs/3114...s-3-difficulty-modes



Blade CP Helicopters

Blade Nano CPX/mCPX BL
Blade 130X
Blade mCPX


deviationtx.com/forum/model-configs/3117...l-3-difficulty-modes
Last edit: 01 May 2014 13:36 by Tom Z.

Please Log in or Create an account to join the conversation.

More
01 May 2014 05:04 #22821 by Tom Z
Replied by Tom Z on topic Helicopter and Quad Models
Reserved

Please Log in or Create an account to join the conversation.

More
10 May 2015 11:19 - 30 May 2016 19:54 #32337 by norris
Replied by norris on topic Helicopter and Quad Models
How to I get this into a Devo7e?-
Attachments:
Last edit: 30 May 2016 19:54 by norris. Reason: Poor English

Please Log in or Create an account to join the conversation.

More
01 Jun 2015 18:55 #33331 by mart123
Replied by mart123 on topic Align Helicopter and Quad Models
Hi Tom is there any Trex 450 Dfc models around..im really struggling since moving from the DX6I. .. (
Regards mart

Please Log in or Create an account to join the conversation.

More
07 Jun 2015 07:51 - 20 Jun 2015 14:25 #33570 by BeamHangar
Replied by BeamHangar on topic Helicopter and Quad Models
Hi TomZ. Know this is an older thread but my query fits here i think.
I'm just branching out to 250mm (ish) race quads and am wondering if i just take an ini.model file from say the Nano Qx and modify it to fly as needed thereafter?

I ask as i don't see the commonly viewed zmr or qav etc models having their own sections (unless beyond 3x pages in the forum thread list) so i wonder if it would work?

I'm thinking not due to the FC boards are so different in configuration.

Thanks
Gypsy
Last edit: 20 Jun 2015 14:25 by BeamHangar.

Please Log in or Create an account to join the conversation.

More
15 Jun 2016 05:46 - 16 Jun 2016 00:45 #50652 by Tom Z
Replied by Tom Z on topic Helicopter and Quad Models
Firmware version 5 is now available.
All of my models that I have posted on this web site for version 4.0.1 firmware should be compatible with the new version 5 firmware.

See this post:

www.deviationtx.com/forum/6-general-disc...eased?start=60#50648
Last edit: 16 Jun 2016 00:45 by Tom Z.

Please Log in or Create an account to join the conversation.

More
04 Jul 2019 06:37 #74677 by roadmutt
Replied by roadmutt on topic Blade Helicopter and Quad Models
I just recently was gifted a Blade 200 SR X and i have no idea how to set up my receiver and transmitter to work with it, can you provide any assistance there I noticed its missing from your list. This poor thing needs some airtime

Please Log in or Create an account to join the conversation.

More
05 Jul 2019 02:41 #74680 by gdenton
Replied by gdenton on topic Blade Helicopter and Quad Models
Which transmitter are you using?

Please Log in or Create an account to join the conversation.

More
20 Aug 2019 04:49 #74947 by I.A.G.A
Replied by I.A.G.A on topic Blade Helicopter and Quad Models
Hello, I'm new on this platform and I've already received my brandnew Jumper T8sgPlus V2 sofar so good.
In order to have voice access flying my drones MJX Bugs 5W and my Hubsan H502S thanks to this system and wunderfull wiki I've already seccesfull build the external voicebox taht works well without binding my 2 drones.
I think I did any mistake because now I cann't find no longer the protocols for MJXQ and Hubsan into the Jumper menu or using the usb-mode accessing via deviationtx to select or setting up this models.
I'm sure that the both models (MJXQ and Hubsan and protocols are visible and including on this model when I received this brandnew RC.
I've already downloaded the most recently firmwareupdatehere "deviation-t8sg_v2_plus-v5.0.0-28ce50f" but when I'm looking into the dowloaded zip I cann't find all of the supported models as the MJXQ and the Hubsan to copy these into the system of my brandnew Jumper T8sgPlus V2.
to select and setup .
I think it isn't possible to write the details of the protocols manually into a new template of the models because I think these protocols are hardcoded into the firmware of deviationtx system. Otherwise I don't have all of the details of this protocols.
Plz., can somebody tell my what's wrong and how to solve this so I can use my Jumper T8sgPlus V2 with my both drones?
This forum is verry helpfull and I was lookin on this forum a long time but I cann't find any answere to help me.
I'm verry proud to have access to the settings using deviationtx, welldone at the developpers and helpfull members on this forum! Many thanks for any help or tips about my problem. Kind regards!

Please Log in or Create an account to join the conversation.

Time to create page: 0.086 seconds
Powered by Kunena Forum