Joomla says you aren't logged in

templates:devo3_1:js:main.js

Sitemap

This is a sitemap over all available pages ordered by namespaces.

development
hardware
model_config
- 2-channel_racing_yacht_config
- 4g6s_2610s_pitch_servo_jump
- 250_280_qav_quadcopter_devo_7e_3_way_switches
- align_t-rex_150_dfc_-_3_difficulty_modes
- align_t-rex_150_dfc_-_3d_settings
- align_t-rex_150_dfc_-_beginner_settings
- align_t-rex_150_dfc_-_standard_settings
- align_t-rex_150_dfc_-_ultra_beginner_settings
- align_trex_250_dfc_3gx_using_dsm2
- apm_-_arducopter_multirotor_spektrum_dsm2_8ch_rx
- ar_drone_2_0
- bixler_2_2_position_flaps_and_3_flight_modes
- bixler_2_with_flaps_devo_8s_rx802
- blade_130
- blade_130_x_-_3d_settings
- blade_130_x_-_beginner_settings
- blade_130_x_-_standard_settings
- blade_130x_bo105_wobble
- blade_180_qx_hd
- blade_180cfx_with_devo8s
- blade_200_srx_devo_10_with_tamed_down_flight_modes
- blade_200qx
- blade_200qx_3_way_switches_devo7e
- blade_230s
- blade_300x_with_ar7200bx_beastx
- blade_350_qx_from_horizon
- blade_350_qx_rth_problem_with_devo_7_e
- blade_350qx_config_template_and_icon
- blade_cx2
- blade_fp_helicopter_-_beginner_settings
- blade_fp_helicopters_-_standard_settings
- blade_inductrix_for_devo_7e
- blade_mcp_x
- blade_mcpx_-_ultra_beginner_settings
- blade_mcpx_v1_v2_bl-_standard_settings
- blade_mcpx_v1_v2_bl_-_3d_settings
- blade_mcpx_v1_v2_bl_-_beginner_settings
- blade_mqx
- blade_msrx_config_for_devo8_v4_0
- blade_nano_cp_ncpx
- blade_nano_cp_s
- blade_nano_cp_s_devo_10_with_safe
- blade_nano_cp_x_-_3d_settings
- blade_nano_cp_x_-_beginner_settings
- blade_nano_cp_x_-_standard_settings
- blade_nano_cpx_mcpx_130x_-_3_difficulty_modes
- blade_nano_qx
- blade_nanocpx_130x_-_ultra_beginner_settings
- blade_walkera_align_-_standard_mixer
- cb100
- config_for_walkera_genius_cp_v2_standard_mixer
- convert_this_module_for_a_devo7e
- delta_ray_by_hobbyzone_with_safe_technology
- devo_7e_for_flightsim_sky-gambler_storm-raiders
- devo_10_fatshark_head_tracking
- devo_10_for_fx071_with_6g_3g_and_3_flight_modes
- devo_10_on_phoenix
- devo_12s_with_mini_cp_brushless
- dji_f550_devo10_naza-m_lite
- dji_naza_gps_with_r710_or_r910_rx_on_dbus_output
- dji_phantom
- dji_phantom_-_just_a_little_help_needed
- dromida_ominus_model_for_the_devo7e
- e-flite_umx_habu_s_df180_config_devo10
- eachine_racer_250_general_purpose_6ch_rx_cf_bf_op
- elevon_mix_help_please
- f450_multiwii_mega_aio
- fancy_blade_msr_config
- feewing_a-10_with_flight_stabilizer_devo_10
- file_for_rcl_extreme_one_x
- flip_fpv_quadcopter
- flitetest_f-22_raptor_delta_wing
- floureon_h101_devo10_inverted_flight_trainer
- fy326_q7_quadcopter
- genius_cp
- genius_wk2801pro_mode
- gyro_settings_super_cp
- hcp100s_dsmx_satellite
- heli-max_100cp_using_standard_gui
- help_converting_my_supercp_to_phoenix_model_-_fmod
- help_me_stop_yaw_output_unless_throttle_is_up
- hisky_fbl-70_on_devo_10_ht8
- hisky_fbl-80cp_on_devo_10_ht8
- hisky_hcp100s_with_nrf_soldered
- hm830_paper_airplane_model_ini
- hobby_king_assault_reaper_500_with_devo12_config
- hobbyking_turnigy_stadium_track_1_18_rc_car
- hobbyzone_champ
- how_to_program_snap-flap_aileron_on_devo10
- hubsan_h107d_devo_7e_ini
- hubsan_x4
- hubsan_x4_config
- huiying_x6058_model_file
- issues_with_nano_qx_3d_model_file
- jjrc1000_questions
- jjrc_1000a_quadcopter_v202
- jjrc_h20_hex_devo_7e
- juncheng_3015-1_3015-2
- kds450c_nofbl_with_rx2801pro
- kk2_0_multirotor
- kk2_quadcopter_settings_for_deviation_on_devo8s
- ladybird_dsm2
- lanyu_asw28
- mastercp_and_v120d02sv2_with_thanks_to_tom_z
- mcpx_v2_full_idleup
- mini_cp_standard_config_for_ver_3_0
- model_config_for_msh_brain_ikon_tracx
- msr_devo_10_toggle_icons
- multiwii_crius_aio_pro_devo7e_with_3x2_switch_mod
- my_align_t-rex_450_rx1002_devo_10_config_file
- ni_hui_u207
- nine_eagles_b319_black_hawk_for_devo_6
- nine_eagles_solo_pro_125_-_beginner_settings
- nine_eagles_solo_pro_125_-_standard_settings
- nine_eagles_solo_pro_180_3d_-_beginner_settings
- nine_eagles_solo_pro_180_3d_-_standard_settings
- nine_eagles_solo_pro_180_3g
- nine_eagles_solo_pro_287_devo_7e
- nova_quanum_eventually_cheerson_cx-20
- orange_r610_in_typhoonpro_450-heli_dsm2
- orange_rx3s_on_a_f9f_panther_edf_jet
- parkzone_ultra_micro_t-28_trojan
- parkzone_umx_sbach_342
- passer-x_v-tail_motor_glider_dsmx_devo6
- qbot_micro
- qr_ladybird
- raquel_quadcopter_and_devo10
- realflight_devo10
- reversing_pitch_in_the_model_file
- robbe_arrow_sr_evo_fp_for_devo7e
- rules
- skyartec_wasp_nano_cp
- solo_pro_125_smooth_config
- super_cp
- super_cp_master_cp_-_devo_7e_-_v3_0_model
- syma_x1_model_and_icon
- syma_x5c_config_for_video_and_photo_use
- syma_x5sc_explorer_2
- syma_x11_config
- syma_x12_config
- t-rex_450_fbl-rx701_devo-zyx-s_fbl_module
- t-rex_450_flybarless_rx2702_v_2801_pro
- t-rex_450_se_v2_with_rx601
- tandem_rotor_in_tx_ccpm_mixing
- tarot_align_450_dfc_w_walkera_2702v_3-axis
- tested_standard_gui_v922_wl-t6_devo_8s_combo
- trex450pro_fbl_2801_devo_-_beastx_hobbymate
- trex_450_pro_fbl_tarot_xyz
- trex_500_flybar_with_2801
- trim_button_as_toggle_mode_for_gyro_gain
- tweak_model_ini_for_rcl_xtreme
- v120d02s
- v500d01_devo
- v911_throttle_curve_question
- v922_fbl100_is_this_normal
- vapor_config
- vl_toys_vl959
- walkera_-_qr_infra_x_-_with_mode
- walkera_4_6s_wk2401
- walkera_4f200lm_-_beginner_settings
- walkera_4f200lm_-_standard_settings
- walkera_cp_helicopters_-_3_difficulty_modes
- walkera_cp_helicopters_-_3d_settings
- walkera_cp_helicopters_-_beginner_settings
- walkera_cp_helicopters_-_standard_settings
- walkera_cp_helicopters_-_ultra_beginner_settings
- walkera_fp_helicopters_-_beginner_settings
- walkera_fp_helicopters_-_standard_settings
- walkera_g400_gps
- walkera_hm1_a_stock_tame_settings
- walkera_master_cp_-_3d_settings
- walkera_master_cp_-_beginner_settings
- walkera_master_cp_-_standard_settings
- walkera_master_cp_non_-_3d_model_devo_10
- walkera_minicp_beginner_settings
- walkera_minicp_for_devo7e
- walkera_new_v120d02s_beginner_settings
- walkera_qr_ladybird
- walkera_qr_x350_configs_for_devo_10
- walkera_qr_x350_pro_with_devo_10
- walkera_quads_-_beginner_settings
- walkera_quads_-_standard_settings
- walkera_v100d01_-_beginner_settings
- walkera_v100d01_-_standard_settings
- walkera_v200d02
- walkera_v200d03_-_beginner_settings
- walkera_v200d03_-_standard_settings
- walkera_v450d01_d03_-_3d_settings
- walkera_v450d01_d03_-_beginner_settings
- walkera_v450d01_d03_-_standard_settings
- wing_wing_z-84_for_devo_7e_no_switches_elevons
- wl-toys_v913_modelconfig
- wl_toys_-_v911
- wl_toys_v202_microquad_-_devo8s
- wl_toys_v911_with_devo_7e_mode2
- wl_toys_v931_config_for_devo10
- wl_toys_v939
- wltoys_v686w_for_devo_7e
- wltoys_v931_v977_v2
- x_quadcopter_crius_multiwii_se_devo_10_1002_rx
- yd717_model
- 2-channel racing yacht config
- 4G6S (2610S) Pitch Servo Jump
- 250 280 QAV Quadcopter devo 7E 3 way switches
- Align T-Rex 150 DFC - 3 Difficulty Modes
- Align T-Rex 150 DFC - 3D Settings
- Align T-Rex 150 DFC - Beginner Settings
- Align T-Rex 150 DFC - Standard Settings
- Align T-Rex 150 DFC - Ultra Beginner Settings
- Align Trex 250 DFC 3GX using DSM2
- APM - arducopter multirotor spektrum dsm2 8ch rx
- AR.Drone 2.0
- Bixler 2: 2 position flaps and 3 flight modes ;)
- Bixler 2 with Flaps + Devo 8s + RX802
- Blade 130
- Blade 130 X - 3D Settings
- Blade 130 X - Beginner Settings
- Blade 130 X - Standard Settings
- Blade 130x bo105 wobble
- Blade 180 QX HD
- Blade 180CFX with Devo8S
- Blade 200 SRX Devo 10 with tamed down flight modes
- Blade 200QX
- Blade 200qx 3 way switches devo7E
- Blade 230s
- Blade 300x with AR7200BX BeastX
- Blade 350 QX from Horizon
- blade 350 qx RTH problem with devo 7 e
- Blade 350QX Config/Template and Icon
- Blade CX2
- Blade FP Helicopter - Beginner Settings
- Blade FP Helicopters - Standard Settings
- Blade Inductrix for Devo 7E
- Blade mCP X
- Blade mCPX - Ultra Beginner Settings
- Blade mCPX V1/V2/BL- Standard Settings
- Blade mCPX V1/V2/BL - 3D Settings
- Blade mCPX V1/V2/ BL - Beginner Settings
- Blade mQX
- Blade mSRX config for Devo8 V4.0
- Blade Nano CP / NCPx
- Blade Nano CP S
- Blade NANO CP S DEVO 10 With SAFE
- Blade Nano CP X - 3D Settings
- Blade Nano CP X - Beginner Settings
- Blade Nano CP X - Standard Settings
- Blade Nano CPX/mCPX/130X - 3 Difficulty Modes
- Blade Nano QX
- Blade NanoCPX/130X - Ultra Beginner Settings
- Blade/Walkera/Align - Standard Mixer
- CB100
- Config for Walkera Genius CP V2 Standard Mixer
- Convert this module for a devo7e
- Delta Ray by HobbyZone with SAFE Technology
- DEVO 7e for FlightSim Sky-Gambler Storm-Raiders
- Devo 10 Fatshark Head tracking
- Devo 10 for FX071 with 6G / 3G and 3 flight modes
- Devo 10 on Phoenix
- devo 12s with mini cp brushless
- DJI F550 / DEVO10 / Naza-M Lite
- DJI Naza + GPS with R710 or R910 RX on DBUS output
- DJI Phantom
- DJI Phantom - Just a little help needed
- Dromida Ominus Model for the Devo7e
- E-Flite UMX HABU S DF180 Config DEVO10
- Eachine Racer 250/general purpose 6ch RX+CF/BF/OP
- Elevon mix help please
- F450 + Multiwii Mega AIO
- "fancy" BLADE MSR config
- Feewing A-10 with Flight Stabilizer Devo 10
- File for RCL Extreme One X
- Flip FPV Quadcopter
- Flitetest F-22 Raptor Delta wing
- Floureon H101 Devo10 Inverted flight Trainer
- fy326 q7 quadcopter
- Genius CP
- Genius WK2801Pro mode
- Gyro Settings (Super CP)
- HCP100S + DSMX satellite
- Heli-Max 100cp using Standard GUI
- Help converting my SuperCP to Phoenix Model - FMOD
- Help me stop Yaw output unless throttle is up
- Hisky FBL-70 On Devo 10 / HT8
- Hisky FBL-80cp On Devo 10 / HT8
- HiSky HCP100S with nRF soldered
- HM830 Paper Airplane Model.ini
- Hobby King Assault Reaper 500 with Devo12 config
- HobbyKing Turnigy Stadium Track 1/18 RC Car
- HobbyZone Champ
- How to Program Snap-Flap Aileron on Devo10 ???
- Hubsan H107D+ Devo 7E ini
- Hubsan X4
- Hubsan X4 config
- Huiying X6058 Model File
- issues with nano qx 3d model file
- JJRC1000 questions
- JJRC 1000A Quadcopter (V202)
- JJRC H20 Hex Devo 7e
- Juncheng 3015-1 / 3015-2
- KDS450C (noFBL) with RX2801Pro
- KK2.0 Multirotor
- KK2 quadcopter settings for Deviation on Devo8s
- Ladybird DSM2
- Lanyu ASW28
- MasterCP and V120D02SV2 With Thanks to Tom Z
- Mcpx v2 Full IdleUp
- MINI CP standard config for ver.3.0
- Model config for MSH Brain/Ikon/Tracx
- MSR DEVO 10 Toggle Icons
- Multiwii Crius AIO Pro Devo7e with 3x2 switch mod
- My Align T-Rex 450 + RX1002 + Devo 10 config file
- Ni Hui U207
- Nine Eagles B319 Black Hawk for Devo 6
- Nine Eagles Solo Pro 125 - Beginner Settings
- Nine Eagles Solo Pro 125 - Standard Settings
- Nine Eagles Solo Pro 180 3D - Beginner Settings
- Nine Eagles Solo Pro 180 3D - Standard Settings
- Nine Eagles Solo Pro 180 3G
- Nine Eagles Solo Pro 287 + Devo 7e
- Nova Quanum (eventually Cheerson CX-20)
- Orange R610 in TyphoonPro 450-Heli (DSM2)
- Orange RX3S on a F9F Panther EDF Jet
- Parkzone Ultra Micro T-28 Trojan
- Parkzone UMX Sbach 342
- Passer-X V-Tail Motor Glider DSMX Devo6
- Turnigy Q-BOT micro
- QR Ladybird
- Raquel Quadcopter and Devo10
- RealFlight Devo10
- Reversing Pitch in the Model File
- Robbe ARROW SR/EVO FP for Devo7E
- Rules
- Skyartec WASP nano CP
- Solo Pro 125 Smooth Config
- Super CP
- Super CP / Master CP - Devo 7e - V3.0 model
- Syma X1 model and icon
- Syma X5C config for Video and Photo use
- SYMA X5SC Explorer 2
- Syma X11 config
- Syma X12 config.
- T-rex 450 FBL-RX701 Devo-ZYX-S FBL module...
- T-REX 450 Flybarless RX2702 V (2801 pro)
- T-Rex 450 SE V2 with RX601
- tandem rotor in tx ccpm mixing
- Tarot/Align 450 DFC w/ Walkera 2702v 3-axis
- Tested Standard GUI V922 WL-T6 Devo 8s combo
- Trex450Pro FBL 2801 & Devo - BeastX/HobbyMate
- Trex 450 Pro Fbl Tarot XYZ
- Trex 500 FlyBar with 2801
- Trim button as toggle mode for gyro gain
- Tweak model.ini for RCL Xtreme
- V120d02s
- V500D01 DEVO
- v911 throttle curve question
- V922 (FBL100) Is this normal?
- Vapor config
- VL Toys VL959
- Walkera - QR Infra X - with + mode
- Walkera 4#6S WK2401
- Walkera 4F200LM - Beginner Settings
- Walkera 4F200LM - Standard Settings
- Walkera CP Helicopters - 3 Difficulty Modes
- Walkera CP Helicopters - 3D Settings
- Walkera CP Helicopters - Beginner Settings
- Walkera CP Helicopters - Standard Settings
- Walkera CP Helicopters - Ultra Beginner Settings
- Walkera FP Helicopters - Beginner settings
- Walkera FP Helicopters - Standard Settings
- Walkera G400 GPS
- Walkera HM1#A stock...tame settings
- Walkera Master CP - 3D Settings
- Walkera Master CP - Beginner Settings
- Walkera Master CP - Standard Settings
- Walkera Master CP Non - 3D Model (Devo 10)
- Walkera miniCP: beginner settings
- Walkera MiniCP for Devo7E
- Walkera New V120D02s: beginner settings
- Walkera QR Ladybird
- Walkera QR X350 Configs for Devo 10
- Walkera QR X350 Pro with Devo 10
- Walkera Quads - Beginner Settings
- Walkera Quads - Standard Settings
- Walkera V100D01 - Beginner Settings
- Walkera V100D01 - Standard Settings
- Walkera V200D02
- Walkera V200D03 - Beginner Settings
- Walkera V200D03 - Standard Settings
- Walkera V450D01/D03 - 3D Settings
- Walkera V450D01/D03 - Beginner Settings
- Walkera V450D01/D03 - Standard Settings
- Wing Wing Z-84 for Devo 7e (no switches) Elevons
- WL-Toys V913 Modelconfig
- WL Toys - V911
- WL Toys V202 microquad - DEVO8S
- WL Toys V911 with Devo 7E (Mode2)
- WL Toys V931 config for Devo10
- Wl toys V939
- WLToys V686W for Devo 7e
- WLToys V931 (V977 V2)
- X Quadcopter/Crius Multiwii SE/Devo 10/1002 RX
- YD717 model
modulelist
playground
protocol
release_notes
rf_module_installation
transmitter
wiki
Adding 3 position virtual switch to Devo 7e
Building the Multi-Module
Development Resources
EMAX Babyhawk 85mm
eo16h
FAQ
Getting started with deviationTx
Programming guides
hardware
Installing Deviation on the F12e/F7/F4
jumper_t8sg_opentx
le_firmware_e33b5db
model5
model_config
Supported modules
release_notes
Reporting Bugs
Adding External Modules to Your Deviation Transmitter
Simple steps to create guides such as Tutorials or How-Tos
The supported SPI Flash are:
DeviationTx
Sticky throttle hold
Supported Models
Supported Protocols
tinyhawk_freestyle
Devo transmitter switches
Adding voice support
Which DEVO Tx Should I Buy?